Showcase · status and figures as of the check date on each card
Mineral areas and assets in Kazakhstan
Areas selected by our geologists, and operating quarries and deposits offered by their owners. Name, coordinates and documents follow an NDA unless the card says otherwise.
Single value from samples collected during geological mapping (not an average; analysis method and number of samples not stated):
gold 6.4 g/t
Host rocks: a massif of plagiogranites and granodiorites of an Early–Late Paleozoic intrusive complex; the mineralization is confined to a crush zone in granodiorites
Details →Materials after an NDA
Not verified The QAZNEDR team has not yet completed a full check of the object and documentsQN-215
Over a wider area that includes the site, trenches and test pits exposed quartz-sericite limonitized rocks in a zone of increased fracturing and schistosity; a drill hole intersected mylonites and breccias of quartz-sericite rocks
Details →Materials after an NDA
Not verified The QAZNEDR team has not yet completed a full check of the object and documentsQN-216
Single channel sample, chemical analysis (not an average):
copper 0.58%
Host rocks: a complex of porphyrites and sandstones of Silurian age; along the fault the rocks are strongly schistose and ochre-oxidized (ochre-stained)
Details →Materials after an NDA
Not verified The QAZNEDR team has not yet completed a full check of the object and documentsQN-220
Average for a four-meter interval, chemical analysis (working and number of samples not stated):
lead 0.25%
Host rocks: quartz diorites, intensely crushed, silicified and ochre-stained in the zone; on the flanks the zone goes under a piedmont blanket 25–35 m thick of sandy loams with fine clastic material
Details →Materials after an NDA
Not verified The QAZNEDR team has not yet completed a full check of the object and documentsQN-227
Single composite grab sample from a pegmatoid inclusion, spectral analysis (not an average):
zinc 0.6%, lead 0.3%, copper 0.1%, antimony 0.06%
Host rocks: quartz diorites, diorites and granodiorites (the granodiorites intrude the diorite massif). They are cut by numerous dikes and small oval bodies of pegmatoid granites and granite porphyries; dikes of light gray aplitic granites predominate, which in turn are cut by dikes of microdiorite porphyries
Details →Materials after an NDA
Not verified The QAZNEDR team has not yet completed a full check of the object and documentsQN-229
Result of analysis of channel samples (number of samples, thickness and averaging method not stated; a single result):
manganese 28.04%
Host rocks: siliceous jasper-like schists of the Upper Visean – Lower Carboniferous; in the mineralization zones, according to microscopic data, they pass into typical ferruginous quartzites (dark cherry to red in color)
Details →Materials after an NDA
Not verified The QAZNEDR team has not yet completed a full check of the object and documentsQN-235
Spectral analysis of four samples (range, order of magnitude, not an ore calculation):
manganese 1.0–3.0%
Form of mineralization: manganese oxides are present as thin (fractions of a centimeter) layer-parallel segregations, coatings and crusts of black and cherry-gray color; the rock has microscopic lens-shaped areas enriched in manganese oxides
Details →Materials after an NDA
Not verified The QAZNEDR team has not yet completed a full check of the object and documentsQN-236
Ranges for core samples of two drill holes in the oxidation zone (not an average; number of samples not stated):
molybdenum 0.01–0.09%
Host rocks: hornfelsed sedimentary rocks of the Givetian and Frasnian stages (medium- and fine-grained sandstones interbedded with siltstones), forming a gentle anticlinal fold; they lie in the exocontact of granodiorites of Middle–Late Carboniferous age, which are cut by leucocratic biotite granites of the Upper Carboniferous; the width of the hornfels band is up to 1 km
Details →Materials after an NDA
Not verified The QAZNEDR team has not yet completed a full check of the object and documentsQN-238
Ranges for individual samples of quartz-tourmaline veins (number of samples not named; not an average):
bismuth 0.001–0.07%
Host rocks: Cambrian jasperoids, siliceous siltstones, breccias, sandstones, andesite-basalt and diabase porphyrites; the whole complex is intruded by mafic rocks (gabbro, gabbro-diabase) and quartz diorites; bodies of birbirites lie within the mafic rocks
Details →Materials after an NDA
Not verified The QAZNEDR team has not yet completed a full check of the object and documentsQN-201
Average for the ore body (authors' calculation from seven drill holes):
copper 4.73% at an average thickness of 2.53 m
The ore body lies at the junction of a large regional fault (dip 60–70°, displacement 300–400 m) with a series of other faults; the whole crush and weathering zone (about 200 m) carries copper, lead and zinc mineralization, with the maximum at the contact with limestones. Tectonic contact of red-colored sandstones and siltstones of the Upper Devonian with dolomitized limestones of the Upper Devonian; no intrusive rocks were encountered at the site
Details →Materials after an NDA
Not verified The QAZNEDR team has not yet completed a full check of the object and documentsQN-203
Average for an ore interval of a drill hole (core sampling):
molybdenum 0.105% over 21 m
Two stockworks are outlined; the enriched parts are steeply dipping lenses and ore shoots in zones of the strongest fracturing. The beryllium halos do not coincide with the stockwork and molybdenum mineralization: they are confined to zones of fracturing, silicification, ferruginization, chloritization and fluoritization; ore minerals are molybdenite, pyrite, chalcopyrite, chalcocite, galena, bismuthinite
Details →Materials after an NDA
Not verified The QAZNEDR team has not yet completed a full check of the object and documentsQN-204
Average for one drill-hole intersection (main ore bed):
iron 29.0% at a true thickness of 32.0 m
One of a group of objects strung out in a chain; according to the authors, the largest of the group. Host rocks are metamorphosed terrigenous-siliceous deposits of the Middle–Upper Ordovician (quartzites, schists, sandstones), the site lies in the exocontact of an Upper Paleozoic intrusion; the structure is the limb of a narrow overturned anticlinal fold (limb dips 70–80° and 50–60°), the ores lie mostly in the middle and lower parts of the quartzites or beneath them
Details →Materials after an NDA
Not verified The QAZNEDR team has not yet completed a full check of the object and documentsQN-205
Average for the section opened by trenches (range of averages):
P2O5 17–19%
The bed lies in a Lower Cambrian phosphorite-bearing sequence. Footwall: weakly phosphatized dolomites, P2O5 from 0.5 to 3.4%, thickness from 0 to 8 m. Hanging wall: two thin horizons — brown dolomites with Fe2O3 up to 9.42% and phosphatized siliceous dolomites (P2O5 from 2.1 to 14.8%, SiO2 from 18.53 to 70.36%, thickness from 0 to 4 m)
Details →Materials after an NDA
Not verified The QAZNEDR team has not yet completed a full check of the object and documentsQN-206
Average over a 5 m drill-hole interval (chemical analysis):
lead 1.2%
Host rocks are Archean quartz-sericite and quartz-chlorite schists, dipping at 70–80°; there are dikes of gabbro and gabbro-amphibolite (Ordovician) and a massif of porphyritic diorite (Middle Devonian). The ore bodies and zones are confined to the hinge parts of a narrow high-order anticlinal fold; a fault 800 m long is known
Details →Materials after an NDA
Not verified The QAZNEDR team has not yet completed a full check of the object and documentsQN-207
Average for a zone of 7 m apparent thickness (trenches; number of samples not stated):
lead 2.6%, zinc 0.09%, silver 3 g/t
The zone is composed of disintegrated, intensely weathered carbonate rocks of the Upper Devonian (in one place the source also names Lower Carboniferous rocks), alternating with clay deposits, with fragments of red quartzite-like rocks with disseminated galena
Details →Materials after an NDA
Not verified The QAZNEDR team has not yet completed a full check of the object and documentsQN-208
Range across samples, trenches (19 channel samples):
lead 0.012–1.0%, silver 0.3–3.0 g/t; the source gives no averages
Host rocks are fine-crystalline limestones of the Upper Devonian; besides galena (the main mineral), sphalerite, chalcopyrite and pyrite are noted in drill holes
Details →Materials after an NDA
Not verified The QAZNEDR team has not yet completed a full check of the object and documentsQN-209
WO3 0.046–0.09% (range for the lens, not a weighted average)
The mineralization is distributed extremely unevenly and is clustered in character: small lenses and nests (the nests sometimes with high tungsten concentrations); the ore bodies are small mineralized lenses with low average tungsten contents. The occurrence is divided into three sites (main, second and third)
Details →Materials after an NDA
Not verified The QAZNEDR team has not yet completed a full check of the object and documentsQN-210
Average for a trench over a 1.3 m interval (authors' calculation; the interval includes a sample of the galena itself):
lead 10.1%
Ore bodies are lens- and nest-shaped, up to 1.3 m thick and up to 140 m long; the thickness decreases sharply with depth. The crush zones are traced by trenches for 1,200 m, with a thickness from 1 to 10–12 m
Details →Materials after an NDA
Not verified The QAZNEDR team has not yet completed a full check of the object and documentsQN-212
Average for a drill-core interval (spectral analysis, 22.1 m along the hole, true thickness not given):
zinc 0.69%, lead 0.31%, molybdenum 0.04%
Host rocks: gently dipping felsic effusives of the upper member of the Upper Carboniferous (tuff-lavas of dacite porphyry, fluidal and spherulitic lavas of quartz porphyry, locally intensely pyritized); overlain by a thin cover of Quaternary deposits 0.5–3.0 m thick
Details →Materials after an NDA
Not verified The QAZNEDR team has not yet completed a full check of the object and documentsQN-213
Average for a drill-hole interval (the best described interval, 2.8 m; number of samples not stated):
gold 1.34 g/t, silver 10.0 g/t, copper 0.70%
Ore minerals: pyrite, chalcopyrite, galena, sphalerite, rutile, rarely hematite, chalcocite, goethite; by-products zinc up to 0.1% and tin up to 0.006% (earlier data, low contents)
Details →Materials after an NDA
Not verified The QAZNEDR team has not yet completed a full check of the object and documentsQN-110