Skip to content

QN-206 · Lead (galena) mineralization in finely schistose crenulated schists; veinlets and disseminations of galena, rarely pyrite and chalcopyrite, cerussite and malachite in oxidized outcrops

Lead — Karaganda Region

Average over a 5 m drill-hole interval (chemical analysis):

lead 1.2%

  • Host rocks are Archean quartz-sericite and quartz-chlorite schists, dipping at 70–80°; there are dikes of gabbro and gabbro-amphibolite (Ordovician) and a massif of porphyritic diorite (Middle Devonian). The ore bodies and zones are confined to the hinge parts of a narrow high-order anticlinal fold; a fault 800 m long is known
  • Dimensions: ore zones in trenches 1 m and 2 m thick, 2–7 m and 2–19 m in other trenches; in one drill hole an ore body 5 m thick and an interval of visible galena 15 m long (per the final document); a single ore outcrop with an area of 100 sq. m. Areal secondary lead halos form three areas with a total area of the order of 10 sq. km
  • Drill-hole interval 5 m thick: average for the interval, lead 1.2% (chemical analysis); the final document gives “on average 2.5%” for the same interval (analysis method not named). The detailed sampling table covers only 3.2 m of the 5 m: three samples (1.0, 1.0 and 1.2 m) give 0.54, 0.53 and 1.25% by chemical analysis. Other zones in this hole: lead 0.006–0.4% (range)
  • Trenches, spectral analysis of channel samples: lead 0.1–1.5% (range across samples). The “averages” named in the text, 1.5% (three intervals 1–2 m wide) and 1% (four intervals), are spectral values (order of magnitude); in the table the chemical values of the same intervals are lower (for example 1.07, 1.21, 0.84%), so the author's text and table diverge. Two trenches intersected ore zones 1 m and 2 m thick with an average lead of 1% (method not named)
  • Other trenches: a trench of the gold-survey sub-area, mineralized zones 2–19 m, average lead 0.35%, gold 0.01–0.4 g/t (method and number of samples not named); six trenches of 300 cu. m, in two of them zones 2–7 m thick, lead 0.1–0.4% (range), in the rest such zones are rare and thin
  • Single ore outcrop (surface, ochreous): lead up to 10%, gold up to 4 g/t (“up to X”, single maxima); a trench across the outcrop: lead reaches 1.25% in two intervals of 1.0 m each, 0.3–0.8% in 14 samples
  • A drill hole in weakly intense halos (172 m): by semiquantitative spectral analysis lead reaches 0.01–0.28% in the intervals 3–18 m and 135–152 m, no visible lead mineralization. Secondary lead halos: average about 0.05% (0.007–0.02% predominates); gold for the area as a whole 0.01–0.5 g/t (rarely up to 4 g/t), ranges across samples
  • No reserves. Geologists' forecast resources from the secondary halos: lead 750,000 t (category not named; to a depth of 100 m, the correction factor 0.2 was written in by hand in the report, the areal productivity value is not filled in in the calculation, so the number cannot be reproduced); this is a forecast, not reserves. The authors of the first report state that the parameters of the geochemical field and the predicted resources cannot serve as criteria for assessing the scale of mineralization
  • Level of study: lithogeochemical survey, induced polarization electrical prospecting (including the downhole variant), trenches (six of 300 cu. m and five of 55 cu. m), two drill holes (101 m and 172 m). Sampling: drill hole, chemical analysis of the interval; trenches, mainly spectral analysis

Report fragments

Source: archival geological reports (scans in our archive)

Location

The place is shown approximately: the object lies inside the circle. The exact place and materials follow a meeting.Region boundaries: © OpenStreetMap contributors, geoBoundaries (ODbL)
Contact