Skip to content

QN-211 · Hydrothermal (as defined by the authors) lead mineralization: quartz-calcite veins and veinlets with disseminated galena and small galena lenses, and smears of malachite and azurite, in a crush zone

Lead — Almaty Region

Average for a trench over a 1.3 m interval (authors' calculation; the interval includes a sample of the galena itself):

lead 10.1%

  • Ore bodies are lens- and nest-shaped, up to 1.3 m thick and up to 140 m long; the thickness decreases sharply with depth. The crush zones are traced by trenches for 1,200 m, with a thickness from 1 to 10–12 m
  • Quartz-calcite veinlets are from 2–3 mm to 3–4 cm thick (20 cm in one trench); galena disseminations rarely reach 1 × 0.5 cm. In one trench a galena lens 10 cm thick and about 1.5 m long was encountered
  • Host rocks: sandstones, siltstones and chloritized schists of the Upper Cambrian – Lower Ordovician, broken by tectonic fractures linked to fault zones (brecciation, ferruginization, leaching voids after sulfides); elevated contents of lead, gold and silver are confined to one of the fault zones
  • Chemical analysis from trenches: lead 0.49–8.75% in the fault zone (range across samples)
  • Average for a trench over a 1.3 m interval: lead 10.1% (the authors' calculation; the interval includes a sample of the galena itself; a recalculation from the sampling table, weighted by length over three samples, gives about 11.5%)
  • Associated components (ranges across samples from two trenches, not tied to the 1.3 m interval): by chemical analysis molybdenum 0.03–0.32%, cobalt 0.01–0.021%; by spectral analysis (order of magnitude) copper 0.004–0.1%, zinc 0.004–0.01%, arsenic 0.003–0.025%, bismuth up to 0.002%, antimony up to 0.1%
  • Single samples of the galena itself (a mineral, not ore): lead 60 and 86%, silver up to 354 g/t, gold up to 0.1 g/t. The maximum gold in the authors' text is 0.3 g/t (a single sample of schists in the hanging wall of the lens); in the sampling table one schist sample is printed as 0.4 g/t
  • In two drill holes 176 and 104 m deep the contents are mostly background: lead 0.0005–0.008% (only in the 0–2 m interval 0.04%); in breccia after schists with native copper and chalcopyrite copper 0.08% (0.1 m interval); the contents decrease sharply with depth
  • Level of study: 19 trenches (total volume 264 m³), 55 channel and 36 composite point samples; deep geochemical prospecting over an area of 3.5 × 3.5 km on an 800 × 50 m grid gave background contents; two drill holes sited as a fork in the line of one of the trenches
  • Reserves and forecast resources are not given in the source materials.

Report fragments

Source: archival geological reports (scans in our archive)

Location

The place is shown approximately: the object lies inside the circle. The exact place and materials follow a meeting.Region boundaries: © OpenStreetMap contributors, geoBoundaries (ODbL)
Contact