Skip to content

QN-212 · Molybdenum-lead (polymetallic) mineralization with zinc in zones of tectonic dislocation of felsic effusives showing signs of hydrothermal alteration

Zinc, lead, molybdenum — Almaty Region

Average for a drill-core interval (spectral analysis, 22.1 m along the hole, true thickness not given):

zinc 0.69%, lead 0.31%, molybdenum 0.04%

  • Host rocks: gently dipping felsic effusives of the upper member of the Upper Carboniferous (tuff-lavas of dacite porphyry, fluidal and spherulitic lavas of quartz porphyry, locally intensely pyritized); overlain by a thin cover of Quaternary deposits 0.5–3.0 m thick
  • Two zones of tectonic dislocation cut the fluidal quartz-porphyry lavas; the most abundant polymetallic and molybdenum mineralization, like the radioactive anomaly, is confined to these zones. Near the surface the mineralization is represented by secondary minerals; in the drill-hole core, dissemination of pyrite, galena and sphalerite and signs of leaching (limonite after pyrite, voids) down to the bottom of the hole (87.8 m); the oxidation zone, according to the author, is deep
  • Detailed work area 0.15 km². Ore zone in the trench 3.0 m thick (sampling interval 0–4 m); ore interval in the core of the vertical drill hole 34.0–56.1 m (22.1 m along the hole, true thickness not given)
  • Average for the trench (channel sampling, interval 0–4 m, ore zone 3.0 m): spectral analysis – molybdenum 0.098%, lead 2.16%, copper 0.11%, bismuth 0.006%; chemical analysis of the same interval – molybdenum 0.26%, lead 2.36%. In individual samples (single maxima): molybdenum 0.735%, lead 6.35% (number of samples not stated)
  • Average for the drill-core interval 34.0–56.1 m (spectral analysis): molybdenum 0.04%, lead 0.31%, copper 0.023%, zinc 0.69%; in individual samples lead up to 1.25%, zinc up to 5.0% (single samples)
  • Average for the test pit (interval 0.75–2.15 m, spectral and gold analyses): molybdenum 0.016%, lead 4.37%, zinc 0.20%, copper 0.27%, silver 0.0004%; one sample (single sample): lead 10% and gold 1.25 g/t. Zinc was not detected in the channel samples from the trenches; the author explains this by leaching of zinc from the near-surface oxidation zone
  • Dispersion halos by metallometric survey: lead 0.01–0.1%; in the final document of the work, for a group of halos, lead 0.06–0.15% and zinc 0.01–0.04% are given. Two areas of elevated radioactivity by radiometry (this is not metal grade): 16,000 m² and 1,500 m²
  • Oxidation-zone minerals: cerussite, malachite, wulfenite, limonite, manganese hydroxides; in the core – pyrite, galena, sphalerite. Associated: copper, bismuth, vanadium, strontium, arsenic, uranium (0.017% by chemical analysis of the trench interval), traces of silver and beryllium
  • Level of study: schematic geological and metallometric surveys at a large scale, walking gamma survey, trenches (the number is given differently in the source: 9 and 7), five test pits up to 2.7 m deep, one vertical drill hole with gamma logging; 23 channel and 50 core samples, 403 metallometric samples for uranium. The checking of the halos is unfinished; the drill-hole sampling is spectral
  • The source has no calculation of reserves or forecast resources.

Report fragments

Source: archival geological reports (scans in our archive)

Location

The place is shown approximately: the object lies inside the circle. The exact place and materials follow a meeting.Region boundaries: © OpenStreetMap contributors, geoBoundaries (ODbL)
Contact