Skip to content

Iron · Areas

Our geologists studied the geology from archival reports. Name, coordinates and materials — after an NDA.

Areas
Illustration

Found: 5

QN-204

Iron

Karaganda Region · Magnetic anomaly with meager magnetite, locally hematite-magnetite ores in bedded and lens-bedded lodes conformable with the host rocks; six thin lodes

Average for one drill-hole intersection (main ore bed):

iron 29.0% at a true thickness of 32.0 m

  • One of a group of objects strung out in a chain; according to the authors, the largest of the group. Host rocks are metamorphosed terrigenous-siliceous deposits of the Middle–Upper Ordovician (quartzites, schists, sandstones), the site lies in the exocontact of an Upper Paleozoic intrusion; the structure is the limb of a narrow overturned anticlinal fold (limb dips 70–80° and 50–60°), the ores lie mostly in the middle and lower parts of the quartzites or beneath them
  • Dimensions: the magnetic anomaly along the 100 gamma contour has parts about 2 km and about 1.6 km long, with a width down dip (for the longer part) of 300 m. By drilling, the ore bodies are traced for 400–600 m along strike and 400 m down dip; they pinch out quickly on the flanks and the ore thickness decreases somewhat with depth
  • The ore bodies are overlain by Neogene clays up to 100 m thick; ore intervals were intersected by drill holes at depths from 52 m to more than 350 m
  • Average per drill-hole intersection (number of samples not stated in the source): main ore bed — iron 29.0% at a true thickness of 32.0 m (in a later description the same interval: thickness 38 m, iron 29% in the text and 28% in the table of the same volume); upper bed — iron 38.8% at a true thickness of 4.0 m (38.3% in the table of the later description)
  • Two interbeds in the same drill hole: iron 23.0% at a thickness of 1.0 m (in the table of the later volume the thickness is 2 m; called a poor iron-manganese ore) and iron 18.32% at a thickness of 3.0 m. In other drill holes, intersections with iron from 7.6 to 35% (the lower values are meager interbeds)
  • Authors' estimate: the average iron content in the ore bodies is not more than 25%
  • Ore minerals: magnetite, less often hematite-magnetite. Full spectral analysis of grab samples of core of all rock varieties (not ore samples) showed no elevated contents; lead, zinc and copper are relatively elevated — 0.005–0.02%. In preliminary technological tests of the ores of the ore field as a whole (not of this site separately), magnetic separation gave a concentrate with an iron content of 50–67.5% at a recovery of up to 85% (this is a concentrate, not the grade in the ore)
  • Geologists' forecast resources — a forecast, not reserves: in the first estimate “possible reserves” of 7.2–20.8 million t (at a bulk density of 3 t/m³; the lower limit obtained by halving the parameters); in the later one “approximate reserves” of 50 million t at an iron content of 25%. There are no categories and no reserve calculation
  • Level of study: ground magnetic survey at a scale of 1:10 000, mapping and prospecting-and-evaluation drilling with geophysical logging of the drill holes; there is no information on mining in the sources
Karaganda Region · approximate place, inside the circle
QN-210

Iron

Almaty Region · Iron ore occurrence: five ore bodies of submeridional strike over an area of about 100 × 150 m; according to the authors, the mineralization is uniform

Average for the ore body (the largest of five; channel samples, trenches, chemical analysis):

iron 33.17%

  • In the typescript the ore mineral is not named; in a handwritten insertion on the page the ore bodies are called hematite bodies
  • The ore bodies are confined to a tectonically bounded area among jasperoids of tentatively Sinian age and green-colored sandstones of the Upper Silurian; within it there is an outcrop of diabase porphyrites with jasper interbeds; details of the structural control are not given in the source
  • First (largest) body: length 62 m, thickness 9–15 m, average 13 m. Second: length 37 m, average thickness 6.3 m. Third: length 46 m, thickness 4–10 m (average 7 m). The remaining two bodies are thinner: average thickness 1–2 m, extent 8–50 m
  • Chemical analysis of channel samples (channels 2 m long at 2 m spacing, 51 samples from 13 trenches; arithmetic means). First body: iron from 16–19% to 43.05% (range across samples), average for the body 33.17%; the lower content is explained by the inclusion of selvages in the sampling (dilution)
  • Second body: iron from 31% to 47.4%, average for the body 36.7%; third body: from 33.4% to 36.9%, average for the body 34.94%; remaining bodies: iron 30–40% (chemical analysis of channel samples, range across samples)
  • Average for the occurrence as a whole, the authors' estimate: iron 35–36% (the calculation is not given in the source)
  • Spectral analysis of channel samples (order of magnitude): copper from 0.01 to 0.1–0.2% (in all samples), zinc 0.1–0.5%, lead 0.02–0.05%, molybdenum from traces to 0.005%, arsenic 0.01–0.2%, cobalt 0.01–0.02%, germanium 0.002–0.005%, nickel 0.01–0.02%, traces of gallium; phosphorus in single samples below 1%, manganese in most samples 1% and more
  • Level of study: a schematic geological map at 1:1000 scale, 13 trenches, 51 channel samples; no drill holes, the depth of the bodies has not been studied
  • Geologists' forecast resources: for the occurrence as a whole, iron hardly exceeds 150–200 thousand t (no categories, no calculation); this is a forecast, not reserves
Almaty Region · approximate place, inside the circle
QN-232

Iron

Pavlodar Region · Iron occurrence: irregular boulders of concretionary shape of brown iron ore

Range (number of samples and sampling method not stated in the source):

iron 35–50%

  • Host rocks: Mesozoic weathering crust over serpentinites
  • Dimensions: the sizes of the boulders have not been established
  • Grades: iron 35–50% (range; the number of samples and the sampling method are not stated in the source)
  • Ore mineral: brown iron ore; there is no information on associated components
  • Level of study: the occurrence is given in the summary to the geological map at a scale of 1:200,000 and was previously inspected as part of a revision; no specific prospecting work at the site is described in the source
  • Reserves and predicted resources are not given
Pavlodar Region · approximate place, inside the circle
QN-233

Iron

Akmola Region · Iron ore occurrence in the field of a large magnetic anomaly; the mineralization is represented by mushketovite in quartzites

Maximum for grab samples (number of samples not stated; the source does not state whether the figure refers to iron or to the ore mineral):

up to 35%

  • Host rocks and structural control: the occurrence is confined to quartzites
  • Dimensions: the thickness of the ore bodies is up to several tens of centimeters, the length — the first tens of meters
  • Grades: up to 35% from grab samples (maximum; the source does not state whether the figure refers to iron or to the ore mineral; the number of samples is not given)
  • Ore mineral: mushketovite; there is no information on associated components
  • Level of study: the data are given in the summary to the geological map at a scale of 1:200,000; an aeromagnetic survey and integrated geological-geophysical work were carried out in the district; workings and drilling at the occurrence itself are not described in the source
  • Reserves and predicted resources are not given
Akmola Region · approximate place, inside the circle
QN-234

Manganese, iron, cobalt

East Kazakhstan Region · Two neighboring mineralization points: iron — spotty mineralization of ferruginous quartzites (fine hematite dissemination in a quartz groundmass), lens-shaped bodies; manganese and cobalt — in strongly ferruginized siliceous schists and jasper quartzites

Result of analysis of channel samples (number of samples, thickness and averaging method not stated; a single result):

manganese 28.04%

  • Host rocks: siliceous jasper-like schists of the Upper Visean – Lower Carboniferous; in the mineralization zones, according to microscopic data, they pass into typical ferruginous quartzites (dark cherry to red in color)
  • Structural control: lithological — the mineralization is confined to siliceous and jasper-like rocks
  • Dimensions, iron: on one area (about 3.7 km²) one lens-shaped body about 100 m long and about 20 m thick (wide); on the other (about 9.1 km²) 13 lens-shaped bodies 10–12 m long, 5–20 m thick, one of them 85 m long. The dimensions of the manganese body are not named
  • Manganese: 28.04% Mn with 1.57% Fe and 0.015% Co — result of analysis of channel samples; the number of samples, thickness and averaging method are not named (a single result)
  • Iron: maximum 17.18% Fe from 16 channel and 2 grab samples (a maximum, not an average); further in the source, copper 0.33%, titanium less than 1%, cobalt 0.02% are given (the type of value is not stated)
  • Ore minerals, iron: hematite (platy, acicular, in veinlet-like accumulations), carbonate, chlorite, chalcedony. Manganese minerals are not identified. Associated: cobalt (manganese point), copper and titanium (iron point)
  • Level of study: prospecting and mapping work with workings at the iron occurrence; grab samples were taken there earlier; there is no information on drilling or sampling at depth
  • Reserves and predicted resources are not given
East Kazakhstan Region · approximate place, inside the circle
Areas · Iron

How the deal works

  1. 01Our geologists studied the area from archival reports.
  2. 02Status checked against the subsoil-use map as of the date shown.
  3. 03At a meeting after an NDA we share the materials and choose the deal format.
  4. 04We apply for the licence for the deal and support you until it is issued.

Ready to discuss an area?

Browse the areas we have prepared or message us — we reply within one business day.

Illustration
Contact