QN-205 · Bedded phosphorites; one phosphorite bed within a member of interbedded phosphorite conglomerate, fine- and medium-oolitic phosphorite and phosphatized chert; the bed is steep and the body extends as a narrow strip
Phosphorite — Zhambyl Region
Average for the section opened by trenches (range of averages):
P2O5 17–19%
- The bed lies in a Lower Cambrian phosphorite-bearing sequence. Footwall: weakly phosphatized dolomites, P2O5 from 0.5 to 3.4%, thickness from 0 to 8 m. Hanging wall: two thin horizons — brown dolomites with Fe2O3 up to 9.42% and phosphatized siliceous dolomites (P2O5 from 2.1 to 14.8%, SiO2 from 18.53 to 70.36%, thickness from 0 to 4 m)
- The rocks dip at 50–87°, the bed itself at 70–87°. A longitudinal fault separates the site from the neighbouring structure; the bed is offset by transverse and diagonal faults (displacement in plan from 5 to 60–70 m). In topographic lows the bedrock is covered by Quaternary deposits up to 15 m thick
- Strike length: more than 12 km according to the basin reserve summary, 6.5 km according to an early estimate. A 4.5 km segment of the strip lies under thick loose deposits and was opened by one trench
- Bed thickness from 9 trenches: from 0.2 to 2 m; in the conclusion of the same report — from 3.0 m to complete pinch-out, 1.5 m on average; in a chapter of the same report — from 5 m to complete pinch-out; according to the reserve summary — from 4 m to complete pinch-out. The author expects the bed to thicken with depth, up to 5.6 m (an expectation, not a measurement)
- Average for the section opened by trenches: P2O5 17–19% (range of averages), maximum 22.7%. Average for the site according to the basin reserve summary: 17.49% P2O5; an early estimate gives 25% P2O5, basis of the estimate not stated
- Phosphorite conglomerate, sample range: P2O5 6.10–20.55%, SiO2 11.14–20.46%, MgO 3.2–10.80%, CaO 30.8–43.12%. Phosphatized chert in the member: P2O5 from 7.3 to 9.25%
- Fine-oolitic phosphorite, sample range: P2O5 17.0–22.7%, SiO2 8.05–41.18%, MgO 2.0–4.3%, CaO 28.28–43.54%
- Phosphate occurs as oolites and phosphorite fragments; under the classification used in the basin the ores belong to the siliceous-carbonate type, siliceous-dolomitic variety, and on the flanks of the opened section to the siliceous-shale type. The elevated MgO content matters for beneficiation (up to 10.80% in the conglomerate); an iron-manganese horizon lies in the hanging wall of the bed
- Level of study: geological mapping and prospecting, inclusion in the basin reserve summary, then prospecting and appraisal on part of the strip (detailed geological mapping, 9 trenches, sampling and chemical analyses); there are no drilling data on the site in our materials
- Reserves: according to the basin reserve summary the reserves were classed as off-balance; our materials contain no reserve figures and no forecast estimate is given
Report fragments
Source: archival geological reports (scans in our archive)