Skip to content

QN-213 · Gold-copper-silver mineralization with molybdenum and lead in silicification zones and zones of disseminated sulfide mineralization

Gold, copper, silver — Karaganda Region

Average for a drill-hole interval (the best described interval, 2.8 m; number of samples not stated):

gold 1.34 g/t, silver 10.0 g/t, copper 0.70%

  • Ore minerals: pyrite, chalcopyrite, galena, sphalerite, rutile, rarely hematite, chalcocite, goethite; by-products zinc up to 0.1% and tin up to 0.006% (earlier data, low contents)
  • Host rocks: intrusive rocks of intermediate composition; in the surroundings, volcanogenic and carbonate rocks and dikes of felsic composition; about 30% of the area is covered by Quaternary deposits. The mineralization is confined to silicification zones in the host intrusive rocks
  • Three silicification zones have been identified, 950 m long in total, with an average thickness of 9 m; the zones were assessed to a depth of 100 m. For the forecast calculation an ore-bearing zone area of 90,087 m² was adopted, with a total thickness of potential ore-bearing levels of 10.6 m
  • Average for drill-hole intervals (number of samples in the interval not stated): the best described interval is 2.8 m – gold 1.34 g/t, silver 10.0 g/t, copper 0.70%, lead 0.45%, molybdenum 0.006%; in other intervals (1 to 15 m) gold 0.015–0.47 g/t, in some intervals silver 1.65–12.82 g/t, copper 0.01–0.40%, lead 0.03–0.47%, molybdenum 0.0002–0.02%
  • Samples from silicification zones (range across samples): gold 0.029–0.635 g/t. Range of “elevated contents” in the authors' summary (the upper limits do not occur in the descriptions of individual intervals and are not tied to samples): gold 0.1–3.12 g/t, silver 1.0–20.72 g/t, copper 0.1–1.04%, molybdenum 0.0001–0.06%, lead 0.1–1.06%
  • Earlier data: gold in channel samples 0.02–0.04 g/t (maximum up to 1.5 g/t), in drill holes mostly not more than 0.015 g/t (maximum 1.5 g/t); in one drill hole, by fire assay, gold averages 13 g/t over a 5 m interval and one vein sample gave 15 g/t (single sample; in the summary table the maximum for channel samples is 1.5 g/t, the figures disagree). A control drill hole of the modern work, drilled to check this hole, showed no high grades (maximum 0.47 g/t)
  • Level of study: earlier work – induced polarization electrical survey, drill holes and trenches; modern work – core drilling, geophysics, core sampling, petrographic and mineralogical studies
  • Predicted resources of category P1 (forecast, not reserves): ore 5.195 million t, gold 1.662 t at an average of 0.32 g/t (cut-off grade 0.1 g/t, bulk density 2.87 t/m³); by-product silver per the authors' table 40.857 t (7.90 g/t)

Report fragments

Source: archival geological reports (scans in our archive)

Location

The place is shown approximately: the object lies inside the circle. The exact place and materials follow a meeting.Region boundaries: © OpenStreetMap contributors, geoBoundaries (ODbL)
Contact