Skip to content

Gold · Areas

Our geologists studied the geology from archival reports. Name, coordinates and materials — after an NDA.

Areas
Illustration

Found: 7

QN-04

Gold, zinc

Kyzylorda Region · Ore occurrence

Best interval (average over the interval):

gold 3.47 g/t

  • The report's author assessed the object negatively — by the cut-off standards and economics of that time
  • Nearby — a mineralisation point. Maximum in a single sample: zinc up to 1%

Free of exploration and mining licences, within the state subsoil fund management programme (PUGFN) area (per our check against the map)

Checked 11.11.2026; not an official extract.

Kyzylorda Region · approximate place, inside the circle
Fragment of an archival report, names hidden
Fragment of an archival report, names hidden
QN-213

Gold, copper, silver

Karaganda Region · Gold-copper-silver mineralization with molybdenum and lead in silicification zones and zones of disseminated sulfide mineralization

Average for a drill-hole interval (the best described interval, 2.8 m; number of samples not stated):

gold 1.34 g/t, silver 10.0 g/t, copper 0.70%

  • Ore minerals: pyrite, chalcopyrite, galena, sphalerite, rutile, rarely hematite, chalcocite, goethite; by-products zinc up to 0.1% and tin up to 0.006% (earlier data, low contents)
  • Host rocks: intrusive rocks of intermediate composition; in the surroundings, volcanogenic and carbonate rocks and dikes of felsic composition; about 30% of the area is covered by Quaternary deposits. The mineralization is confined to silicification zones in the host intrusive rocks
  • Three silicification zones have been identified, 950 m long in total, with an average thickness of 9 m; the zones were assessed to a depth of 100 m. For the forecast calculation an ore-bearing zone area of 90,087 m² was adopted, with a total thickness of potential ore-bearing levels of 10.6 m
  • Average for drill-hole intervals (number of samples in the interval not stated): the best described interval is 2.8 m – gold 1.34 g/t, silver 10.0 g/t, copper 0.70%, lead 0.45%, molybdenum 0.006%; in other intervals (1 to 15 m) gold 0.015–0.47 g/t, in some intervals silver 1.65–12.82 g/t, copper 0.01–0.40%, lead 0.03–0.47%, molybdenum 0.0002–0.02%
  • Samples from silicification zones (range across samples): gold 0.029–0.635 g/t. Range of “elevated contents” in the authors' summary (the upper limits do not occur in the descriptions of individual intervals and are not tied to samples): gold 0.1–3.12 g/t, silver 1.0–20.72 g/t, copper 0.1–1.04%, molybdenum 0.0001–0.06%, lead 0.1–1.06%
  • Earlier data: gold in channel samples 0.02–0.04 g/t (maximum up to 1.5 g/t), in drill holes mostly not more than 0.015 g/t (maximum 1.5 g/t); in one drill hole, by fire assay, gold averages 13 g/t over a 5 m interval and one vein sample gave 15 g/t (single sample; in the summary table the maximum for channel samples is 1.5 g/t, the figures disagree). A control drill hole of the modern work, drilled to check this hole, showed no high grades (maximum 0.47 g/t)
  • Level of study: earlier work – induced polarization electrical survey, drill holes and trenches; modern work – core drilling, geophysics, core sampling, petrographic and mineralogical studies
  • Predicted resources of category P1 (forecast, not reserves): ore 5.195 million t, gold 1.662 t at an average of 0.32 g/t (cut-off grade 0.1 g/t, bulk density 2.87 t/m³); by-product silver per the authors' table 40.857 t (7.90 g/t)
Karaganda Region · approximate place, inside the circle
QN-214

Gold

East Kazakhstan Region · Gold and polymetallic mineralization in a crush and silicification zone; mineralogical analysis established the presence of copper and lead minerals

Single value from samples collected during geological mapping (not an average; analysis method and number of samples not stated):

gold 6.4 g/t

  • Host rocks: a massif of plagiogranites and granodiorites of an Early–Late Paleozoic intrusive complex; the mineralization is confined to a crush zone in granodiorites
  • Structural control: the mineralized zone is controlled by a northeast-striking fault
  • Dimensions: a northeast-striking zone (azimuth 40°), 200 m long and up to 15 m thick
  • Grades: gold 6.4 g/t from single samples collected during geological mapping (analysis method and number of samples not stated; a single value, not an average). Silver: traces
  • Ore minerals: limonite, hematite, pyrite, malachite, wulfenite, cerussite; non-ore mineral: quartz
  • Level of study: geological mapping at a scale of 1:200,000, with single samples collected; no workings or drilling in the description
  • Reserves and predicted resources are not given
East Kazakhstan Region · approximate place, inside the circle
QN-215

Gold

East Kazakhstan Region · Secondary lithogeochemical dispersion halo of gold of irregular shape in epidotized and carbonatized volcanics (prospecting area for gold)

Secondary dispersion halo (not ore), lithogeochemical samples:

gold maximum 0.125 g/t

  • Over a wider area that includes the site, trenches and test pits exposed quartz-sericite limonitized rocks in a zone of increased fracturing and schistosity; a drill hole intersected mylonites and breccias of quartz-sericite rocks
  • Host rocks: basalts, andesites and andesite-basalts of the Lower Silurian with interbeds and lenses of lava breccias of the same composition; Upper Devonian sedimentary deposits are developed to a minor extent in the central part. The rocks are everywhere weakly and unevenly hematitized and epidotized, and in the anomaly zone are carbonatized along fine, variably oriented veinlets. Intrusive formations: dikes and rare veins of microgranites, quartz diorites and diabases of Late Silurian age
  • Structural control: the site lies within the zone of influence of a fault system. Over the wider area, the largest northwest-trending fault separates Upper Ordovician and Lower Silurian deposits; small veins of microgranites and diabases in the anomaly zone have a northwest orientation
  • Dimensions: the secondary gold halo is about 600 x 200 m (by the 0.01 g/t isoline); an earlier sparse sampling grid outlined a halo of 250 x 350 m in one part of the site (in another part, three small halos with a maximum of 0.015 g/t)
  • Grades in the halo: gold maximum 0.125 g/t by lithogeochemical samples (secondary dispersion halo, not ore); by the earlier sparse grid, maximum 0.027 g/t
  • Old test pits and trenches at the site of earlier prospecting, whose outline includes the anomaly: 95% of samples fall in the gold range 0.005–0.8 g/t (this is the share of samples within the range, not the share of samples with ore-grade gold; the number of samples is not stated); for one 36 m interval in one of the trenches, gold is 0.05–0.8 g/t (sample range, average not given)
  • Over the wider area of the site: gold was determined in 30% of samples from workings, with grades from 0.005 to 0.5 g/t; heavy-mineral geochemical surveys gave maxima of 19.3 and 31.2 g/t (heavy-mineral concentrate, not grade in rock); in two concentrates, visible gold in an amount of 3–4 colors
  • Accompanying elements (over the wider area): elevated contents of copper (secondary halos up to 0.02%, in workings 0.1–0.25%), molybdenum (halos up to 0.001%, in workings 0.01–0.2%), zinc (halos up to 0.03%, in workings 0.04%), lead (halos up to 0.012%) and silver (halos up to 0.12 g/t). An induced polarization anomaly of 6–8% intensity (a geophysical parameter, not a grade)
  • Level of study: earlier prospecting (lithogeochemistry, gold metallometric survey, test pits, trenches, one drill hole over the wider area); heavy-mineral geochemical surveys at scales of 1:100,000 and 1:25,000; lithogeochemical survey on a 100 x 50 m grid
  • Reserves and predicted resources are not given
East Kazakhstan Region · approximate place, inside the circle
QN-216

Gold

Karaganda Region · Gold occurrence in quartz veins and in zones of silicification and intense ochre staining; the quartz is strongly ochre-stained and pyritized

Maximum across 18 chip samples (not an average):

gold 0.5 g/t

  • Host rocks: sedimentary formations of the Silurian, cut by quartz veins; the veins are oriented in a sub-latitudinal direction (strike 280°)
  • Dimensions: thickness of the quartz veins from 0.1 to 0.5 m; other dimensions are not given. Trenches were driven at 20–40 m spacing and expose the quartz veins and zones of silicification and intense ochre staining
  • Grades: chip samples taken during a revision traverse (18 samples): gold 0.03–0.05 g/t in 9 samples, 0.1 g/t in 4 samples, 0.2 g/t in 3 samples and 0.5 g/t in 2 samples; maximum 0.5 g/t, not an average
  • Ore minerals: pyrite in quartz; ochre staining of the quartz
  • Level of study: a revision traverse with chip sampling; trenches were driven earlier
  • Reserves have not been calculated; no forecast is given
Karaganda Region · approximate place, inside the circle
QN-217

Gold

Almaty Region · Gold-bearing quartz veinlet in hornfels; part of a group of closely spaced small gold occurrences in quartz veinlets lying in tension and shear fractures

Veinlet, spectral analysis (number of samples not stated; not an average):

gold 0.55 g/t

  • Host rocks: quartz-biotite hornfels in the exocontact of a granite massif; for the group of occurrences as a whole, hornfelsed sandstones
  • Structural control: tension and shear fractures in hornfelsed sandstones of the exocontact of a granite massif (for the group of occurrences)
  • Dimensions: a quartz veinlet 5 cm thick and 0.5 m long
  • Grades: gold 0.55 g/t from spectral analysis of the veinlet (number of samples not stated; the value is not an average)
  • Level of study: earlier prospecting and mapping work; sampled by spectral analysis (number of determinations not stated); no mining or drilling work
  • Reserves and predicted resources have not been calculated
Almaty Region · approximate place, inside the circle
QN-239

Bismuth, gold

Almaty Region · Bismuth mineralization in quartz veins and veinlet-silicified zones, accompanied by gold; both high-temperature (quartz-tourmaline) and sulfide-poor medium-temperature quartz veins and veinlet-silicified zones are classed as bismuth-bearing; the area was identified from a heavy-mineral halo of secondary bismuth minerals (basobismutite, bismite)

Ranges for individual samples of quartz-tourmaline veins (number of samples not named; not an average):

bismuth 0.001–0.07%

  • Host rocks: Cambrian jasperoids, siliceous siltstones, breccias, sandstones, andesite-basalt and diabase porphyrites; the whole complex is intruded by mafic rocks (gabbro, gabbro-diabase) and quartz diorites; bodies of birbirites lie within the mafic rocks
  • Structural control: the bodies of mafic rocks are linearly elongated along a sublatitudinal fault; the birbirite bodies are controlled by faults. The veins strike northeast (10–30°) and sublatitudinally, with a steep dip to the southeast and south
  • Dimensions: the bismuth heavy-mineral halo occupies 3.5 km²; birbirite bodies — length from 5 to 1300 m, thickness 3–30 m; quartz veins (often with tourmaline mineralization) measure 200 × 0.5 m
  • Dimensions, continued: sulfide-poor quartz veins and veinlets — from the first tens of meters up to 300 m, thickness not more than 1 m; silicified mafic rocks with quartz veinlets — an area of 200 × 150 m; contact-altered rocks — up to 100 × 10 m
  • Bismuth in individual samples (ranges, not an average; number of samples not named; the veins and altered rocks were evaluated from the surface by workings): in quartz-tourmaline veins 0.001–0.07%; in sulfide-poor quartz veins and veinlet zones 0.0001–0.004%; in birbirites 0.001–0.015%; in silicified mafic rocks with quartz veinlets 0.00015–0.02%; in contact-altered rocks 0.0001–0.0003%
  • Lithogeochemical survey: two samples show bismuth 0.003%. Heavy-mineral halo: bismuth minerals from single grains to 0.01 g/m³ (this is a heavy-mineral sample, not a grade in ore)
  • Gold accompanies the bismuth mineralization everywhere: from traces to 1.0 g/t (maximum of the range, not an average)
  • Ore minerals: uneven disseminated pyrite (up to 3 × 3 mm) and single nests of chalcopyrite; in heavy-mineral samples basobismutite and bismite. Associated component: gold
  • Level of study: areal heavy-mineral sampling and lithogeochemical survey, surface workings; the number of samples and workings is not named; there is no drilling
  • Reserves and predicted resources are not given
Almaty Region · approximate place, inside the circle
Areas · Gold

How the deal works

  1. 01Our geologists studied the area from archival reports.
  2. 02Status checked against the subsoil-use map as of the date shown.
  3. 03At a meeting after an NDA we share the materials and choose the deal format.
  4. 04We apply for the licence for the deal and support you until it is issued.

Ready to discuss an area?

Browse the areas we have prepared or message us — we reply within one business day.

Illustration
Contact