QN-209 · Quartz-scheelite mineralization in zones of silicification, crushing and brecciation; by genesis the authors assign it to meso-epithermal formations of quartz-scheelite-stibnite composition
Tungsten — Almaty Region
Main lens, chemical analysis of trenches:
WO3 0.046–0.09% (range for the lens, not a weighted average)
- The mineralization is distributed extremely unevenly and is clustered in character: small lenses and nests (the nests sometimes with high tungsten concentrations); the ore bodies are small mineralized lenses with low average tungsten contents. The occurrence is divided into three sites (main, second and third)
- Host rocks are volcanogenic-sedimentary formations of the Visean and Namurian stages (tuff gravelstones, tuffaceous sandstones, siliceous tuffaceous siltstones, sandstones); dikes of intermediate composition are widely developed. The mineralization is confined to the zone of an ore-controlling regional fault and to the shear zones splaying from it (alteration zones from 2–4 to 15–30 m thick); in the authors' opinion the control is tectonic and lithological: the highest tungsten contents lie at the junctions of faults of different orientations and in silicified gravelstones
- Main site: two zones of silicification, crushing and brecciation: the first 650 m long, 6–8 to 10–12 m thick; the second traced for 400 m, 8–12 m thick; the dip at the surface is 80–85°, according to drilling data the zone dips at 80° in the opposite direction. Mineralized lenses: the main one 45 m long, 3 m thick in the central part and 1 m on the flanks; two others 10–15 m long and 1 m thick
- Second site: two subparallel silicification zones, the first up to 600 m long (with gaps) and 2–5 m thick, the second about 300 m long and 3–6 m thick; the tungsten samples form separate disconnected lenticles about 30 m long and 1 m thick. Third site: a crushing and brecciation zone 45–60 m wide, zones of veinlet silicification 2–5 m thick traced with gaps for 1.2 km. Overall the lenses are a few meters long, sometimes a few tens of meters, 1 m thick, up to 3 m in swells
- Main site, chemical analysis of trenches: WO3 0.046–0.09% for the main lens and 0.091–0.11% for two small lenses (ranges by lens, not weighted averages); the author notes that the small lens with the higher content (up to 0.11%) is possibly a nest, was not intersected by a drill hole and is not traced along strike in the trenches. Drill-hole core: an interval of 2 m true thickness with tungsten 0.05–0.09% (spectral analysis), the continuation of the main lens at depth; with depth the tungsten content does not change substantially
- Spectral analysis of trenches, main site (98 channel samples and 81 geochemical samples): tungsten in 20 samples, in six of them 0.04–0.09% (confirmed by chemical analysis), in eight 0.001–0.005%, in the rest 0.0005–0.0008%. Second site: tungsten in only 5 samples, 0.01–0.05% (25 channel and 29 geochemical samples). Third site: tungsten in 8 samples, in three of them 0.01–0.03%, in the rest 0.001–0.0005% (50 channel and 44 geochemical samples)
- Single samples: one spot geochemical sample with visible scheelite from the silicification zone, WO3 18.6% (single sample; the author generalizes the same value as “in nests up to 18.6%”, there is no second measurement); one geochemical sample, tungsten 0.3% (spectral analysis), taken in a zone of the second site and not included in its 5 samples. Of 310 geochemical samples, tungsten was found in 30 (0.005–0.016%) and in one (0.3%)
- Scheelite is the main ore mineral (fine-grained segregations 1–2 mm, less often up to 1.5–2.0 cm); pyrite, arsenopyrite, galena (single grains), stibnite; quartz is the gangue mineral. In 66 heavy-mineral samples: single grains of scheelite in 22, weight contents in 8. Accompanying elements (spectral analysis of geochemical samples): antimony 0.01–0.03% (up to 0.1% in individual samples, up to 1% in one), arsenic 0.005–0.06%, molybdenum up to 0.003%, lead 0.004–0.015%. Gold: not detected by special analysis in 20 samples of the main site and 10 samples of the second site; 2 gold grains in one heavy-mineral sample; there is no numerical gold content
- Level of study: prospecting traverses, heavy-mineral sampling over 8 km², geochemical sampling (310 samples), a geological map at 1:10,000, trenches (12 at the main site, 124.4 m³; 5 at the second, 61.8 m³; 3 at the third, 61.8 m³ — both volumes are printed identically in the source), drilling of 181.4 m (two holes: the first did not intersect the ore zone because of a change in its dip, the second, a counter hole, did); 45 core samples and 75 geochemical core samples were taken. Reserves and forecast are not given in the source materials
Report fragments
Source: archival geological reports (scans in our archive)