Skip to content

Showcase · status and figures as of the check date on each card

Mineral areas and assets in Kazakhstan

Areas selected by our geologists, and operating quarries and deposits offered by their owners. Name, coordinates and documents follow an NDA unless the card says otherwise.

Illustration
QN-222

Tungsten, molybdenum, bismuth, tin, zinc, lead

East Kazakhstan Region · A tungsten-molybdenum ore occurrence in quartz, quartz-greisen and quartz-topaz veins; among the ore metals, bismuth, tin, lead and zinc have also been established

Ranges by samples (chemical and spectral analysis; not an average):

tungsten 0.001–0.04%

  • Host rocks: granites of the late Upper Paleozoic; the authors associate tungsten and molybdenum with intrusions of the Late Upper Paleozoic complex
  • Dimensions: one quartz-greisen vein and six quartz veins. According to one description the maximum vein thickness is 4.1 m and the length is not more than 150 m; according to another description the thickness is up to several metres and the length up to 500 m
  • Grades according to the first description (“up to” values; number of samples not stated; the analysis method is named only for molybdenum in quartz veins — spectral): in the quartz-greisen vein tungsten up to 0.1%, lead and zinc up to 0.1%, molybdenum and tin a few thousandths of a percent, copper traces; for the ore occurrence as a whole tin 0.003–0.005% (method and number of samples not stated); in quartz veins molybdenum up to 0.05%
  • Grades according to the second description (chemical and spectral analysis; ranges, not averages): bismuth 0.005–0.02%; molybdenum 0.001–0.05%; tungsten 0.001–0.04%; tin from traces to 0.05%. The numbers of the two descriptions have not been averaged
  • Ore minerals: in heavy-mineral concentrates near the vein — cassiterite, wolframite, malachite, basobismutite (mineralogical data of the concentrates, not grades)
  • Level of study: trenches with a total volume of 193 m³, 189 channel samples, a lithogeochemical survey on a 100 by 20 grid
  • Reserves and predicted resources are not given
East Kazakhstan Region · approximate place, inside the circle
QN-226

Lead, molybdenum, zinc

Almaty Region · A crush, silicification and ochre-staining zone with elevated lead and molybdenum contents, confined to the main branch of a major fault; no visible mineralization other than ochre staining is observed in the zone

Average for a four-meter interval, chemical analysis (working and number of samples not stated):

lead 0.25%

  • Host rocks: quartz diorites, intensely crushed, silicified and ochre-stained in the zone; on the flanks the zone goes under a piedmont blanket 25–35 m thick of sandy loams with fine clastic material
  • Structural control: a crush zone along one of the main branches of a major fault, at the foot of a tectonic scarp; dip angle 70°
  • Dimensions: the thickness of the crush zone exposed by the trench is 6.5 m; the zone is exposed only in the channel and wall of a gully; along strike it has been traced by a profile of auger drill holes
  • Grades, spectral analysis over the whole thickness of the zone (order of magnitude): lead 0.015–0.2%, zinc 0.1%, molybdenum in two samples 0.01–0.02%
  • Grades, chemical analysis: average lead content for a four-meter interval 0.25% (the working and the number of samples are not stated); molybdenum in two samples 0.01–0.029%; gold was not detected by spectral gold analysis
  • Auger drill holes (two drill holes on the scarp in the relief of Paleozoic rocks): lead 0.01–0.06%, zinc 0.02–0.04% (ranges of values)
  • Ore minerals: not named (no visible mineralization); associated component — zinc
  • Level of study: a trench, a test pit 4.5 m deep, a profile of auger drill holes (spacing 5–10 m, depths 8–10 m), spectral and chemical analysis
  • Reserves and predicted resources are not given
Almaty Region · approximate place, inside the circle
QN-227

Zinc

East Kazakhstan Region · A skarn mineralization point: separate outcrops of pyroxene-garnet skarns, each several square metres in area

Chemical analysis (number of samples, working and type of value not stated):

zinc 2.05%

  • Host rocks: roof pendants on granites of the early Upper Paleozoic
  • Dimensions: the size of the site is 20 by 50 m
  • Grades: zinc 2.05% by chemical analysis (number of samples, working and type of value not stated)
  • Spectral analysis (order of magnitude): molybdenum 0.002%, bismuth 0.01%, germanium 0.005%, tin 0.005%
  • Ore minerals: not named; associated elements by spectral analysis are given above
  • Level of study: the point is described in a summary table of mineralization points based on geological mapping materials; no workings in the description
  • Reserves were not calculated; forecast estimates are not given
East Kazakhstan Region · approximate place, inside the circle
QN-228

Zinc, lead, copper, antimony

East Kazakhstan Region · Dikes of aplitic granite with pegmatite nests and lenses among quartz diorites, diorites and granodiorites; elevated contents of zinc, lead, copper and antimony were found in one sample from a pegmatoid inclusion

Single composite grab sample from a pegmatoid inclusion, spectral analysis (not an average):

zinc 0.6%, lead 0.3%, copper 0.1%, antimony 0.06%

  • Host rocks: quartz diorites, diorites and granodiorites (the granodiorites intrude the diorite massif). They are cut by numerous dikes and small oval bodies of pegmatoid granites and granite porphyries; dikes of light gray aplitic granites predominate, which in turn are cut by dikes of microdiorite porphyries
  • Structural control: the dikes strike predominantly close to latitudinal (azimuth 270–280°)
  • Dimensions: work area 1.0 km²; dikes 1 to 2 m thick; pegmatite nests and lenses 5 to 40 cm in size
  • Ore minerals: in the pegmatite nests and lenses, individual crystals and aggregates of black color resembling tourmaline and, occasionally, a sparse disseminated dark gray ore mineral
  • Grades, spectral analysis: one composite grab sample from a pegmatoid inclusion — zinc 0.6%, lead 0.3%, copper 0.1%, antimony 0.06% (single sample, not an average). In the other samples the contents of copper, zinc, lead and molybdenum are low (numbers not given)
  • Gold: present in 7 metallometric samples from loose deposits (secondary halo, not ore), five of them clustered; one value is named, 0.01 g/t (whether it is an average or a maximum for a sample is not stated)
  • Level of study: metallometric and gold geochemical survey (260 samples) and 12 composite grab samples from dikes with pegmatoid nests and lenses, spectral analysis; no workings or drilling are described
  • Reserves and predicted resources are not given
East Kazakhstan Region · approximate place, inside the circle
QN-229

Zinc

Karaganda Region · Zinc mineralization in a clayey weathering crust over limestone-schist rocks of the Cambrian; according to the authors' assumption, zinc in the weathering crust is fixed by clays of montmorillonite composition; no bedrock ore body has been distinguished

Spectral analysis of grab samples from test pits and the surface (interval of the scale for individual samples, not an average for the body):

zinc 0.1–0.4%

  • Host rocks: limestone-schist sequence of Cambrian age, deeply transformed under weathering-crust conditions; bounded by intrusive rocks (gabbro, serpentinites, granites)
  • Structural control: a belt of northwest strike about 300–700 m wide among intrusive rocks
  • Dimensions: area of development of the weathering crust about 1 km²; for the weathering crust over Cambrian rocks as a whole — more than 4 km², thickness up to 40 m
  • Grades, spectral analysis of grab samples from test pits and from the surface (intervals of the scale for individual samples, not averages for the body): zinc 0.1–0.4%, lead 0.04–0.07%, copper 0.01–0.04%, molybdenum 0.001–0.004%, arsenic 0.01–0.04%
  • Grades from drill holes, spectral analysis (intervals of the scale for individual samples). Per the summary table: zinc 0.4–0.7% (one sample), lead 0.07–0.1%, copper 0.01–0.04%, molybdenum 0.001–0.004%, arsenic 0.07–0.1%, beryllium up to 0.0007%, titanium 0.4–0.7%. Per the description of the drill-hole section: zinc by depth 9–29 m — 0.01–0.04%, 29–45 m — 0.07–0.4%; lead and arsenic 0.01–0.04%
  • Ore minerals: not described (zinc in clays); associated: lead, copper, molybdenum, arsenic, beryllium, titanium
  • Level of study: geological mapping at a scale of 1:50,000 and prospecting of earlier years; four test pits and two drill holes within the work area; spectral analysis of grab samples from the surface and from test pits and of samples from drill holes
  • Reserves and predicted resources are not given
Karaganda Region · approximate place, inside the circle
QN-230

Zinc, lead, copper

Karaganda Region · Hydrothermal lead-zinc-copper mineralization in a zone of strongly crushed and weathered pyroclastic rocks; the mineralization is expressed as bands

Spectral analysis of 270 bedrock samples (non-ferrous metals in few samples; values by samples, not an average):

lead up to 0.1%, copper 0.06%, zinc 0.03%

  • Host rocks: strongly crushed and weathered pyroclastic rocks — tuff-schists, tuffaceous sandstones, porphyrite tuffs and thin lenticular interbeds of agglomerate tuffs
  • Structural control: crushing and crumpling of the rocks are noted as a condition for the localization of mineralization
  • Dimensions: per the summary table, length of the mineralization bands up to 100–250 m with a width of 40–50 m; area of the prospecting work about 1.5 km²
  • Grades, spectral analysis of 270 bedrock samples: non-ferrous metals are present in few samples — lead up to 0.1%, copper 0.06%, zinc 0.03%, silver 0.003% (values by samples, not averages). By two chemical samples: lead 0.02–0.05%, zinc 0.01–0.03%, copper 0.01%
  • Grades per the summary table, chemical analysis (number of samples not stated): lead up to 0.6%, zinc up to 0.6%, copper up to 0.3% (maximum values, not averages)
  • Secondary halos by metallometric survey are wider than the contours in the bedrock; the metal contents in them are of the same order (a secondary halo is not ore)
  • Ore minerals: not named; by spectral analysis, tin, germanium, molybdenum, arsenic and bismuth are also present (in hundredths of a percent according to the text), as well as silver (up to 0.003%)
  • Level of study: metallometric survey (665 samples from loose deposits) and spectral sampling of bedrock (270 samples) over an area of about 1.5 km²; the site was previously opened by several trenches; two chemical samples; drilling is not described
  • Reserves and predicted resources are not given
Karaganda Region · approximate place, inside the circle
QN-231

Zinc, copper, lead

Karaganda Region · Polymetallic (zinc, copper, lead) occurrence in a zone of opalization of limestones; by the authors' classification, the contact-metasomatic type

Spectral analysis (order of magnitude; number of samples not stated; not an average for the body):

zinc 1%, copper 1%, lead 0.19–1%

  • Host rocks: opalized limestones of the Lower Tournaisian near the contact with granites of Upper Carboniferous age
  • Structural control: a tectonic zone of meridional direction near the contact with granites
  • Dimensions: opalization zone with an area of 300 × 200 m
  • Grades, spectral analysis (number of samples not stated): zinc and copper 1% each, lead 0.19–1%, molybdenum 0.001–0.01% (order of magnitude, not averages for the body); chemical analyses are not given
  • Metallometric sampling revealed a dispersion halo of lead and zinc (numbers not given; a secondary halo is not ore)
  • Ore minerals: not named; associated — zinc, copper, molybdenum (by spectral analysis)
  • Level of study: spectral analysis of samples and metallometric sampling of earlier years; workings and drilling are not described
  • Reserves and predicted resources are not given
Karaganda Region · approximate place, inside the circle
QN-238

Bismuth, molybdenum, lead

Almaty Region · Bismuth occurrence in the form of several short, thin veinlets of ochre-stained quartz

Single geochemical sample from the veinlets, spectral analysis (not an average):

bismuth 0.5%

  • Host rocks: deposits of the Givetian stage of the Middle Devonian, which contain a dike of granodiorite porphyries
  • Structural control: the veinlets were found in the exocontact of the granodiorite-porphyry dike and are confined to it
  • Dimensions: the veinlets are short, 1–3 cm thick
  • Grades: one geochemical sample from the veinlets, spectral analysis — bismuth 0.5%, lead 0.15%, molybdenum 0.04%, silver 0.0015% (single sample, not an average)
  • Gold: the results of spectral gold analysis are negative, there is no numerical grade
  • Ore minerals are not named in the description; from the single sample — bismuth, lead, molybdenum, silver
  • Level of study: sampled by one geochemical sample with spectral analysis and spectral gold analysis; workings and drilling are not mentioned in the description
  • Reserves and predicted resources are not given
Almaty Region · approximate place, inside the circle
QN-206

Lead

Karaganda Region · Lead (galena) mineralization in finely schistose crenulated schists; veinlets and disseminations of galena, rarely pyrite and chalcopyrite, cerussite and malachite in oxidized outcrops

Average over a 5 m drill-hole interval (chemical analysis):

lead 1.2%

  • Host rocks are Archean quartz-sericite and quartz-chlorite schists, dipping at 70–80°; there are dikes of gabbro and gabbro-amphibolite (Ordovician) and a massif of porphyritic diorite (Middle Devonian). The ore bodies and zones are confined to the hinge parts of a narrow high-order anticlinal fold; a fault 800 m long is known
  • Dimensions: ore zones in trenches 1 m and 2 m thick, 2–7 m and 2–19 m in other trenches; in one drill hole an ore body 5 m thick and an interval of visible galena 15 m long (per the final document); a single ore outcrop with an area of 100 sq. m. Areal secondary lead halos form three areas with a total area of the order of 10 sq. km
  • Drill-hole interval 5 m thick: average for the interval, lead 1.2% (chemical analysis); the final document gives “on average 2.5%” for the same interval (analysis method not named). The detailed sampling table covers only 3.2 m of the 5 m: three samples (1.0, 1.0 and 1.2 m) give 0.54, 0.53 and 1.25% by chemical analysis. Other zones in this hole: lead 0.006–0.4% (range)
  • Trenches, spectral analysis of channel samples: lead 0.1–1.5% (range across samples). The “averages” named in the text, 1.5% (three intervals 1–2 m wide) and 1% (four intervals), are spectral values (order of magnitude); in the table the chemical values of the same intervals are lower (for example 1.07, 1.21, 0.84%), so the author's text and table diverge. Two trenches intersected ore zones 1 m and 2 m thick with an average lead of 1% (method not named)
  • Other trenches: a trench of the gold-survey sub-area, mineralized zones 2–19 m, average lead 0.35%, gold 0.01–0.4 g/t (method and number of samples not named); six trenches of 300 cu. m, in two of them zones 2–7 m thick, lead 0.1–0.4% (range), in the rest such zones are rare and thin
  • Single ore outcrop (surface, ochreous): lead up to 10%, gold up to 4 g/t (“up to X”, single maxima); a trench across the outcrop: lead reaches 1.25% in two intervals of 1.0 m each, 0.3–0.8% in 14 samples
  • A drill hole in weakly intense halos (172 m): by semiquantitative spectral analysis lead reaches 0.01–0.28% in the intervals 3–18 m and 135–152 m, no visible lead mineralization. Secondary lead halos: average about 0.05% (0.007–0.02% predominates); gold for the area as a whole 0.01–0.5 g/t (rarely up to 4 g/t), ranges across samples
  • No reserves. Geologists' forecast resources from the secondary halos: lead 750,000 t (category not named; to a depth of 100 m, the correction factor 0.2 was written in by hand in the report, the areal productivity value is not filled in in the calculation, so the number cannot be reproduced); this is a forecast, not reserves. The authors of the first report state that the parameters of the geochemical field and the predicted resources cannot serve as criteria for assessing the scale of mineralization
  • Level of study: lithogeochemical survey, induced polarization electrical prospecting (including the downhole variant), trenches (six of 300 cu. m and five of 55 cu. m), two drill holes (101 m and 172 m). Sampling: drill hole, chemical analysis of the interval; trenches, mainly spectral analysis
Karaganda Region · approximate place, inside the circle
QN-207

Lead

Karaganda Region · Disseminated galena in a zone of ferruginization and manganization exposed by trenches; genetic type per the source: sedimentary-hydrothermal

Average for a zone of 7 m apparent thickness (trenches; number of samples not stated):

lead 2.6%, zinc 0.09%, silver 3 g/t

  • The zone is composed of disintegrated, intensely weathered carbonate rocks of the Upper Devonian (in one place the source also names Lower Carboniferous rocks), alternating with clay deposits, with fragments of red quartzite-like rocks with disseminated galena
  • Ore (mineralized) zone about 400 m long, apparent thickness 7 m; along strike in one direction the thickness of the mineralized interval decreases to 1.5 m. A thin (0.2 m) interbed of black fine-grained thin-bedded limestones with sparse disseminated galena is noted separately
  • From trenches: average for the zone of 7 m apparent thickness — lead 2.6%, zinc 0.09%, silver 3 g/t (number of samples not named in the source); on the flank, with a mineralized interval 1.5 m thick — lead 0.81%, zinc 0.2%, silver 0.6 g/t
  • Besides the described zone, trenches show intervals of up to 20 m composed of ochreous-clayey formations: lead 0.2–3.3% (range)
  • In another section of the same source, lead 0.8%, zinc 0.2%, silver 0.6 g/t are named for trench samples (the numbers coincide with the flank ones); in the description of the ore field in the same source, the ore zone is given as lead 2.6–3.3%, copper 0.5%
  • Level of study: lithochemical sampling at a scale of 1:10,000 and two trenches; drilling is not listed among the work
  • Geologists' forecast resources: lead to a depth of 200 m estimated by the author of the early work at 100 thousand t (category not stated, calculation parameters not given in the source); this is a forecast, not reserves
  • For the ore field that includes the occurrence, the source gives a calculation of category P3: lead 250 thousand t (parameters: ore zone length 1,000 m, thickness 10 m, depth 300 m, lead content 3.0%; a recalculation of these parameters gives about 243 thousand t); this is a forecast, not reserves
Karaganda Region · approximate place, inside the circle
QN-208

Lead, silver

Karaganda Region · Veinlet-disseminated galena mineralization (lead with silver) as lenses concordant with the strike of the rocks; genetic type per the source: volcanogenic-sedimentary

Range across samples, trenches (19 channel samples):

lead 0.012–1.0%, silver 0.3–3.0 g/t; the source gives no averages

  • Host rocks are fine-crystalline limestones of the Upper Devonian; besides galena (the main mineral), sphalerite, chalcopyrite and pyrite are noted in drill holes
  • Dimensions: four mineralization zones 10–60 m long, from 4–5 to 0.1–0.15 m thick (in another place in the source: zone width 0.1–5.0 m); the area of the occurrence is 3.85 km² (studied by magnetic survey), vertical electrical soundings covered 3.35 km²
  • Trenches (4 trenches, 19 channel samples in sections of 0.5–1.0 m and 0.1–0.2 m), range across samples: lead 0.012–1.0%, zinc 0.003–0.085%, manganese 0.03–1.0%, silver 0.3–3.0 g/t, barium 0.02–1.0%. The numbers are given as ranges or as “up to X”; the source gives no averages and does not disclose whether these are individual samples or interval averages
  • Drill holes (5 holes 100–120 m deep; 41 core samples from the five holes, not only in ore intervals): five ore intervals from 5 to 10.25 m thick with lead from 0.03 to 1.8%, copper up to 0.3%, silver from 0.5 to 8.1 g/t, zinc up to 0.25%; in addition, seven small intervals 0.25–1.5 m thick
  • In another place in the same source: for the same ore intervals thickness 4–10 m, lead 0.14–0.36%, silver 0.5–8.0 g/t, zinc 0.2%; for the trenches zinc 0.03–0.08%, silver 3.0 g/t
  • Secondary halo (an indicator, not a grade in ore): lead 0.03%, manganese 1.0%, silver 0.0001%, barium 0.3%, cadmium 0.0001%
  • Level of study: prospecting traverses, grab and channel samples, trenches, test pits, magnetic survey and vertical electrical soundings at a scale of 1:10,000, five prospecting drill holes (566 linear metres)
  • Reserves and forecast resources are not given in the source
Karaganda Region · approximate place, inside the circle
QN-211

Lead

Almaty Region · Hydrothermal (as defined by the authors) lead mineralization: quartz-calcite veins and veinlets with disseminated galena and small galena lenses, and smears of malachite and azurite, in a crush zone

Average for a trench over a 1.3 m interval (authors' calculation; the interval includes a sample of the galena itself):

lead 10.1%

  • Ore bodies are lens- and nest-shaped, up to 1.3 m thick and up to 140 m long; the thickness decreases sharply with depth. The crush zones are traced by trenches for 1,200 m, with a thickness from 1 to 10–12 m
  • Quartz-calcite veinlets are from 2–3 mm to 3–4 cm thick (20 cm in one trench); galena disseminations rarely reach 1 × 0.5 cm. In one trench a galena lens 10 cm thick and about 1.5 m long was encountered
  • Host rocks: sandstones, siltstones and chloritized schists of the Upper Cambrian – Lower Ordovician, broken by tectonic fractures linked to fault zones (brecciation, ferruginization, leaching voids after sulfides); elevated contents of lead, gold and silver are confined to one of the fault zones
  • Chemical analysis from trenches: lead 0.49–8.75% in the fault zone (range across samples)
  • Average for a trench over a 1.3 m interval: lead 10.1% (the authors' calculation; the interval includes a sample of the galena itself; a recalculation from the sampling table, weighted by length over three samples, gives about 11.5%)
  • Associated components (ranges across samples from two trenches, not tied to the 1.3 m interval): by chemical analysis molybdenum 0.03–0.32%, cobalt 0.01–0.021%; by spectral analysis (order of magnitude) copper 0.004–0.1%, zinc 0.004–0.01%, arsenic 0.003–0.025%, bismuth up to 0.002%, antimony up to 0.1%
  • Single samples of the galena itself (a mineral, not ore): lead 60 and 86%, silver up to 354 g/t, gold up to 0.1 g/t. The maximum gold in the authors' text is 0.3 g/t (a single sample of schists in the hanging wall of the lens); in the sampling table one schist sample is printed as 0.4 g/t
  • In two drill holes 176 and 104 m deep the contents are mostly background: lead 0.0005–0.008% (only in the 0–2 m interval 0.04%); in breccia after schists with native copper and chalcopyrite copper 0.08% (0.1 m interval); the contents decrease sharply with depth
  • Level of study: 19 trenches (total volume 264 m³), 55 channel and 36 composite point samples; deep geochemical prospecting over an area of 3.5 × 3.5 km on an 800 × 50 m grid gave background contents; two drill holes sited as a fork in the line of one of the trenches
  • Reserves and forecast resources are not given in the source materials.
Almaty Region · approximate place, inside the circle
QN-212

Zinc, lead, molybdenum

Almaty Region · Molybdenum-lead (polymetallic) mineralization with zinc in zones of tectonic dislocation of felsic effusives showing signs of hydrothermal alteration

Average for a drill-core interval (spectral analysis, 22.1 m along the hole, true thickness not given):

zinc 0.69%, lead 0.31%, molybdenum 0.04%

  • Host rocks: gently dipping felsic effusives of the upper member of the Upper Carboniferous (tuff-lavas of dacite porphyry, fluidal and spherulitic lavas of quartz porphyry, locally intensely pyritized); overlain by a thin cover of Quaternary deposits 0.5–3.0 m thick
  • Two zones of tectonic dislocation cut the fluidal quartz-porphyry lavas; the most abundant polymetallic and molybdenum mineralization, like the radioactive anomaly, is confined to these zones. Near the surface the mineralization is represented by secondary minerals; in the drill-hole core, dissemination of pyrite, galena and sphalerite and signs of leaching (limonite after pyrite, voids) down to the bottom of the hole (87.8 m); the oxidation zone, according to the author, is deep
  • Detailed work area 0.15 km². Ore zone in the trench 3.0 m thick (sampling interval 0–4 m); ore interval in the core of the vertical drill hole 34.0–56.1 m (22.1 m along the hole, true thickness not given)
  • Average for the trench (channel sampling, interval 0–4 m, ore zone 3.0 m): spectral analysis – molybdenum 0.098%, lead 2.16%, copper 0.11%, bismuth 0.006%; chemical analysis of the same interval – molybdenum 0.26%, lead 2.36%. In individual samples (single maxima): molybdenum 0.735%, lead 6.35% (number of samples not stated)
  • Average for the drill-core interval 34.0–56.1 m (spectral analysis): molybdenum 0.04%, lead 0.31%, copper 0.023%, zinc 0.69%; in individual samples lead up to 1.25%, zinc up to 5.0% (single samples)
  • Average for the test pit (interval 0.75–2.15 m, spectral and gold analyses): molybdenum 0.016%, lead 4.37%, zinc 0.20%, copper 0.27%, silver 0.0004%; one sample (single sample): lead 10% and gold 1.25 g/t. Zinc was not detected in the channel samples from the trenches; the author explains this by leaching of zinc from the near-surface oxidation zone
  • Dispersion halos by metallometric survey: lead 0.01–0.1%; in the final document of the work, for a group of halos, lead 0.06–0.15% and zinc 0.01–0.04% are given. Two areas of elevated radioactivity by radiometry (this is not metal grade): 16,000 m² and 1,500 m²
  • Oxidation-zone minerals: cerussite, malachite, wulfenite, limonite, manganese hydroxides; in the core – pyrite, galena, sphalerite. Associated: copper, bismuth, vanadium, strontium, arsenic, uranium (0.017% by chemical analysis of the trench interval), traces of silver and beryllium
  • Level of study: schematic geological and metallometric surveys at a large scale, walking gamma survey, trenches (the number is given differently in the source: 9 and 7), five test pits up to 2.7 m deep, one vertical drill hole with gamma logging; 23 channel and 50 core samples, 403 metallometric samples for uranium. The checking of the halos is unfinished; the drill-hole sampling is spectral
  • The source has no calculation of reserves or forecast resources.
Almaty Region · approximate place, inside the circle
QN-04

Gold, zinc

Kyzylorda Region · Ore occurrence

Best interval (average over the interval):

gold 3.47 g/t

  • The report's author assessed the object negatively — by the cut-off standards and economics of that time
  • Nearby — a mineralisation point. Maximum in a single sample: zinc up to 1%

Free of exploration and mining licences, within the state subsoil fund management programme (PUGFN) area (per our check against the map)

Checked 11.11.2026; not an official extract.

Kyzylorda Region · approximate place, inside the circle
Fragment of an archival report, names hidden
Fragment of an archival report, names hidden
QN-17

Lead

Zhambyl Region · Ore occurrence

Maximum in a single sample:

lead up to 12%

  • The report's author assessed the object negatively — by the cut-off standards and economics of that time

Free of exploration and mining licences at the coordinate given in the report, within the state subsoil fund management programme (PUGFN) area; an active exploration licence lies nearby, and the object's position is known only approximately (per our check against the map)

Checked 11.11.2026; not an official extract.

Zhambyl Region · approximate place, inside the circle
Fragment of an archival report, names hidden
Fragment of an archival report, names hidden
Contact