Skip to content

Showcase · status and figures as of the check date on each card

Mineral areas and assets in Kazakhstan

Areas selected by our geologists, and operating quarries and deposits offered by their owners. Name, coordinates and documents follow an NDA unless the card says otherwise.

Illustration
Showing 9
QN-222

Tungsten, molybdenum, bismuth, tin, zinc, lead

East Kazakhstan Region · A tungsten-molybdenum ore occurrence in quartz, quartz-greisen and quartz-topaz veins; among the ore metals, bismuth, tin, lead and zinc have also been established

Ranges by samples (chemical and spectral analysis; not an average):

tungsten 0.001–0.04%

  • Host rocks: granites of the late Upper Paleozoic; the authors associate tungsten and molybdenum with intrusions of the Late Upper Paleozoic complex
  • Dimensions: one quartz-greisen vein and six quartz veins. According to one description the maximum vein thickness is 4.1 m and the length is not more than 150 m; according to another description the thickness is up to several metres and the length up to 500 m
  • Grades according to the first description (“up to” values; number of samples not stated; the analysis method is named only for molybdenum in quartz veins — spectral): in the quartz-greisen vein tungsten up to 0.1%, lead and zinc up to 0.1%, molybdenum and tin a few thousandths of a percent, copper traces; for the ore occurrence as a whole tin 0.003–0.005% (method and number of samples not stated); in quartz veins molybdenum up to 0.05%
  • Grades according to the second description (chemical and spectral analysis; ranges, not averages): bismuth 0.005–0.02%; molybdenum 0.001–0.05%; tungsten 0.001–0.04%; tin from traces to 0.05%. The numbers of the two descriptions have not been averaged
  • Ore minerals: in heavy-mineral concentrates near the vein — cassiterite, wolframite, malachite, basobismutite (mineralogical data of the concentrates, not grades)
  • Level of study: trenches with a total volume of 193 m³, 189 channel samples, a lithogeochemical survey on a 100 by 20 grid
  • Reserves and predicted resources are not given
East Kazakhstan Region · approximate place, inside the circle
QN-226

Lead, molybdenum, zinc

Almaty Region · A crush, silicification and ochre-staining zone with elevated lead and molybdenum contents, confined to the main branch of a major fault; no visible mineralization other than ochre staining is observed in the zone

Average for a four-meter interval, chemical analysis (working and number of samples not stated):

lead 0.25%

  • Host rocks: quartz diorites, intensely crushed, silicified and ochre-stained in the zone; on the flanks the zone goes under a piedmont blanket 25–35 m thick of sandy loams with fine clastic material
  • Structural control: a crush zone along one of the main branches of a major fault, at the foot of a tectonic scarp; dip angle 70°
  • Dimensions: the thickness of the crush zone exposed by the trench is 6.5 m; the zone is exposed only in the channel and wall of a gully; along strike it has been traced by a profile of auger drill holes
  • Grades, spectral analysis over the whole thickness of the zone (order of magnitude): lead 0.015–0.2%, zinc 0.1%, molybdenum in two samples 0.01–0.02%
  • Grades, chemical analysis: average lead content for a four-meter interval 0.25% (the working and the number of samples are not stated); molybdenum in two samples 0.01–0.029%; gold was not detected by spectral gold analysis
  • Auger drill holes (two drill holes on the scarp in the relief of Paleozoic rocks): lead 0.01–0.06%, zinc 0.02–0.04% (ranges of values)
  • Ore minerals: not named (no visible mineralization); associated component — zinc
  • Level of study: a trench, a test pit 4.5 m deep, a profile of auger drill holes (spacing 5–10 m, depths 8–10 m), spectral and chemical analysis
  • Reserves and predicted resources are not given
Almaty Region · approximate place, inside the circle
QN-227

Zinc

East Kazakhstan Region · A skarn mineralization point: separate outcrops of pyroxene-garnet skarns, each several square metres in area

Chemical analysis (number of samples, working and type of value not stated):

zinc 2.05%

  • Host rocks: roof pendants on granites of the early Upper Paleozoic
  • Dimensions: the size of the site is 20 by 50 m
  • Grades: zinc 2.05% by chemical analysis (number of samples, working and type of value not stated)
  • Spectral analysis (order of magnitude): molybdenum 0.002%, bismuth 0.01%, germanium 0.005%, tin 0.005%
  • Ore minerals: not named; associated elements by spectral analysis are given above
  • Level of study: the point is described in a summary table of mineralization points based on geological mapping materials; no workings in the description
  • Reserves were not calculated; forecast estimates are not given
East Kazakhstan Region · approximate place, inside the circle
QN-228

Zinc, lead, copper, antimony

East Kazakhstan Region · Dikes of aplitic granite with pegmatite nests and lenses among quartz diorites, diorites and granodiorites; elevated contents of zinc, lead, copper and antimony were found in one sample from a pegmatoid inclusion

Single composite grab sample from a pegmatoid inclusion, spectral analysis (not an average):

zinc 0.6%, lead 0.3%, copper 0.1%, antimony 0.06%

  • Host rocks: quartz diorites, diorites and granodiorites (the granodiorites intrude the diorite massif). They are cut by numerous dikes and small oval bodies of pegmatoid granites and granite porphyries; dikes of light gray aplitic granites predominate, which in turn are cut by dikes of microdiorite porphyries
  • Structural control: the dikes strike predominantly close to latitudinal (azimuth 270–280°)
  • Dimensions: work area 1.0 km²; dikes 1 to 2 m thick; pegmatite nests and lenses 5 to 40 cm in size
  • Ore minerals: in the pegmatite nests and lenses, individual crystals and aggregates of black color resembling tourmaline and, occasionally, a sparse disseminated dark gray ore mineral
  • Grades, spectral analysis: one composite grab sample from a pegmatoid inclusion — zinc 0.6%, lead 0.3%, copper 0.1%, antimony 0.06% (single sample, not an average). In the other samples the contents of copper, zinc, lead and molybdenum are low (numbers not given)
  • Gold: present in 7 metallometric samples from loose deposits (secondary halo, not ore), five of them clustered; one value is named, 0.01 g/t (whether it is an average or a maximum for a sample is not stated)
  • Level of study: metallometric and gold geochemical survey (260 samples) and 12 composite grab samples from dikes with pegmatoid nests and lenses, spectral analysis; no workings or drilling are described
  • Reserves and predicted resources are not given
East Kazakhstan Region · approximate place, inside the circle
QN-229

Zinc

Karaganda Region · Zinc mineralization in a clayey weathering crust over limestone-schist rocks of the Cambrian; according to the authors' assumption, zinc in the weathering crust is fixed by clays of montmorillonite composition; no bedrock ore body has been distinguished

Spectral analysis of grab samples from test pits and the surface (interval of the scale for individual samples, not an average for the body):

zinc 0.1–0.4%

  • Host rocks: limestone-schist sequence of Cambrian age, deeply transformed under weathering-crust conditions; bounded by intrusive rocks (gabbro, serpentinites, granites)
  • Structural control: a belt of northwest strike about 300–700 m wide among intrusive rocks
  • Dimensions: area of development of the weathering crust about 1 km²; for the weathering crust over Cambrian rocks as a whole — more than 4 km², thickness up to 40 m
  • Grades, spectral analysis of grab samples from test pits and from the surface (intervals of the scale for individual samples, not averages for the body): zinc 0.1–0.4%, lead 0.04–0.07%, copper 0.01–0.04%, molybdenum 0.001–0.004%, arsenic 0.01–0.04%
  • Grades from drill holes, spectral analysis (intervals of the scale for individual samples). Per the summary table: zinc 0.4–0.7% (one sample), lead 0.07–0.1%, copper 0.01–0.04%, molybdenum 0.001–0.004%, arsenic 0.07–0.1%, beryllium up to 0.0007%, titanium 0.4–0.7%. Per the description of the drill-hole section: zinc by depth 9–29 m — 0.01–0.04%, 29–45 m — 0.07–0.4%; lead and arsenic 0.01–0.04%
  • Ore minerals: not described (zinc in clays); associated: lead, copper, molybdenum, arsenic, beryllium, titanium
  • Level of study: geological mapping at a scale of 1:50,000 and prospecting of earlier years; four test pits and two drill holes within the work area; spectral analysis of grab samples from the surface and from test pits and of samples from drill holes
  • Reserves and predicted resources are not given
Karaganda Region · approximate place, inside the circle
QN-230

Zinc, lead, copper

Karaganda Region · Hydrothermal lead-zinc-copper mineralization in a zone of strongly crushed and weathered pyroclastic rocks; the mineralization is expressed as bands

Spectral analysis of 270 bedrock samples (non-ferrous metals in few samples; values by samples, not an average):

lead up to 0.1%, copper 0.06%, zinc 0.03%

  • Host rocks: strongly crushed and weathered pyroclastic rocks — tuff-schists, tuffaceous sandstones, porphyrite tuffs and thin lenticular interbeds of agglomerate tuffs
  • Structural control: crushing and crumpling of the rocks are noted as a condition for the localization of mineralization
  • Dimensions: per the summary table, length of the mineralization bands up to 100–250 m with a width of 40–50 m; area of the prospecting work about 1.5 km²
  • Grades, spectral analysis of 270 bedrock samples: non-ferrous metals are present in few samples — lead up to 0.1%, copper 0.06%, zinc 0.03%, silver 0.003% (values by samples, not averages). By two chemical samples: lead 0.02–0.05%, zinc 0.01–0.03%, copper 0.01%
  • Grades per the summary table, chemical analysis (number of samples not stated): lead up to 0.6%, zinc up to 0.6%, copper up to 0.3% (maximum values, not averages)
  • Secondary halos by metallometric survey are wider than the contours in the bedrock; the metal contents in them are of the same order (a secondary halo is not ore)
  • Ore minerals: not named; by spectral analysis, tin, germanium, molybdenum, arsenic and bismuth are also present (in hundredths of a percent according to the text), as well as silver (up to 0.003%)
  • Level of study: metallometric survey (665 samples from loose deposits) and spectral sampling of bedrock (270 samples) over an area of about 1.5 km²; the site was previously opened by several trenches; two chemical samples; drilling is not described
  • Reserves and predicted resources are not given
Karaganda Region · approximate place, inside the circle
QN-231

Zinc, copper, lead

Karaganda Region · Polymetallic (zinc, copper, lead) occurrence in a zone of opalization of limestones; by the authors' classification, the contact-metasomatic type

Spectral analysis (order of magnitude; number of samples not stated; not an average for the body):

zinc 1%, copper 1%, lead 0.19–1%

  • Host rocks: opalized limestones of the Lower Tournaisian near the contact with granites of Upper Carboniferous age
  • Structural control: a tectonic zone of meridional direction near the contact with granites
  • Dimensions: opalization zone with an area of 300 × 200 m
  • Grades, spectral analysis (number of samples not stated): zinc and copper 1% each, lead 0.19–1%, molybdenum 0.001–0.01% (order of magnitude, not averages for the body); chemical analyses are not given
  • Metallometric sampling revealed a dispersion halo of lead and zinc (numbers not given; a secondary halo is not ore)
  • Ore minerals: not named; associated — zinc, copper, molybdenum (by spectral analysis)
  • Level of study: spectral analysis of samples and metallometric sampling of earlier years; workings and drilling are not described
  • Reserves and predicted resources are not given
Karaganda Region · approximate place, inside the circle
QN-212

Zinc, lead, molybdenum

Almaty Region · Molybdenum-lead (polymetallic) mineralization with zinc in zones of tectonic dislocation of felsic effusives showing signs of hydrothermal alteration

Average for a drill-core interval (spectral analysis, 22.1 m along the hole, true thickness not given):

zinc 0.69%, lead 0.31%, molybdenum 0.04%

  • Host rocks: gently dipping felsic effusives of the upper member of the Upper Carboniferous (tuff-lavas of dacite porphyry, fluidal and spherulitic lavas of quartz porphyry, locally intensely pyritized); overlain by a thin cover of Quaternary deposits 0.5–3.0 m thick
  • Two zones of tectonic dislocation cut the fluidal quartz-porphyry lavas; the most abundant polymetallic and molybdenum mineralization, like the radioactive anomaly, is confined to these zones. Near the surface the mineralization is represented by secondary minerals; in the drill-hole core, dissemination of pyrite, galena and sphalerite and signs of leaching (limonite after pyrite, voids) down to the bottom of the hole (87.8 m); the oxidation zone, according to the author, is deep
  • Detailed work area 0.15 km². Ore zone in the trench 3.0 m thick (sampling interval 0–4 m); ore interval in the core of the vertical drill hole 34.0–56.1 m (22.1 m along the hole, true thickness not given)
  • Average for the trench (channel sampling, interval 0–4 m, ore zone 3.0 m): spectral analysis – molybdenum 0.098%, lead 2.16%, copper 0.11%, bismuth 0.006%; chemical analysis of the same interval – molybdenum 0.26%, lead 2.36%. In individual samples (single maxima): molybdenum 0.735%, lead 6.35% (number of samples not stated)
  • Average for the drill-core interval 34.0–56.1 m (spectral analysis): molybdenum 0.04%, lead 0.31%, copper 0.023%, zinc 0.69%; in individual samples lead up to 1.25%, zinc up to 5.0% (single samples)
  • Average for the test pit (interval 0.75–2.15 m, spectral and gold analyses): molybdenum 0.016%, lead 4.37%, zinc 0.20%, copper 0.27%, silver 0.0004%; one sample (single sample): lead 10% and gold 1.25 g/t. Zinc was not detected in the channel samples from the trenches; the author explains this by leaching of zinc from the near-surface oxidation zone
  • Dispersion halos by metallometric survey: lead 0.01–0.1%; in the final document of the work, for a group of halos, lead 0.06–0.15% and zinc 0.01–0.04% are given. Two areas of elevated radioactivity by radiometry (this is not metal grade): 16,000 m² and 1,500 m²
  • Oxidation-zone minerals: cerussite, malachite, wulfenite, limonite, manganese hydroxides; in the core – pyrite, galena, sphalerite. Associated: copper, bismuth, vanadium, strontium, arsenic, uranium (0.017% by chemical analysis of the trench interval), traces of silver and beryllium
  • Level of study: schematic geological and metallometric surveys at a large scale, walking gamma survey, trenches (the number is given differently in the source: 9 and 7), five test pits up to 2.7 m deep, one vertical drill hole with gamma logging; 23 channel and 50 core samples, 403 metallometric samples for uranium. The checking of the halos is unfinished; the drill-hole sampling is spectral
  • The source has no calculation of reserves or forecast resources.
Almaty Region · approximate place, inside the circle
QN-04

Gold, zinc

Kyzylorda Region · Ore occurrence

Best interval (average over the interval):

gold 3.47 g/t

  • The report's author assessed the object negatively — by the cut-off standards and economics of that time
  • Nearby — a mineralisation point. Maximum in a single sample: zinc up to 1%

Free of exploration and mining licences, within the state subsoil fund management programme (PUGFN) area (per our check against the map)

Checked 11.11.2026; not an official extract.

Kyzylorda Region · approximate place, inside the circle
Fragment of an archival report, names hidden
Fragment of an archival report, names hidden
Contact