Skip to content

Showcase · status and figures as of the check date on each card

Mineral areas and assets in Kazakhstan

Areas selected by our geologists, and operating quarries and deposits offered by their owners. Name, coordinates and documents follow an NDA unless the card says otherwise.

Illustration
Each circle is the approximate place of one area; the object lies inside the circle.Region boundaries: © OpenStreetMap contributors, geoBoundaries (ODbL)
QN-218

Copper

East Kazakhstan Region · Copper mineralization in a tectonic zone; represented by coatings and films of malachite

Average of five channel samples (lengths and thicknesses of the sampled intervals not stated):

copper 0.34%

  • Host rocks: siliceous rocks of the Upper Visean (Lower Carboniferous)
  • Structural control: a tectonic zone
  • Grades: average copper content 0.34% from five channel samples, maximum by samples 0.84% (the lengths and thicknesses of the sampled intervals are not stated)
  • Ore minerals: malachite (coatings, films)
  • Level of study: channel sampling, five samples; workings and dimensions are not given in the description
  • Reserves and predicted resources are not given
East Kazakhstan Region · approximate place, inside the circle
QN-219

Copper

East Kazakhstan Region · Copper mineralization in quartz veins (vein type): several quartz veins with inclusions of chalcopyrite and malachite, lying conformably with a schistosity zone along a fault

Single channel sample, chemical analysis (not an average):

copper 0.58%

  • Host rocks: a complex of porphyrites and sandstones of Silurian age; along the fault the rocks are strongly schistose and ochre-oxidized (ochre-stained)
  • Structural control: a fault line of northwest strike; the veins are confined to the schistosity zone along it
  • Dimensions: the largest vein is about 500 m long and up to 1.5 m thick
  • Grades: copper 0.58% — chemical analysis, one channel sample (a single sample, not an average). Copper 0.3% — a metallometric sample (a different analytical method; the values of the two methods are not averaged)
  • Ore minerals: chalcopyrite, malachite. Associated components are not named
  • Level of study: geological mapping at a scale of 1:200,000; the object is described as a point — one channel sample and one metallometric sample; workings and drilling are not mentioned in the description
  • Reserves and resources are not given
East Kazakhstan Region · approximate place, inside the circle
QN-220

Copper, tungsten

Almaty Region · A site of copper and tungsten mineralization points in thin quartz veins: malachite dissemination is established in one vein, scheelite in another vein of the same site

Single sample from a malachite-bearing vein, chemical analysis (not an average):

copper 0.4%

  • The veins are quartz, separate and rare: one or two veins per 15–20 m
  • Host rocks: Lower Carboniferous (Visean–Namurian) tuffaceous sandstones, tuff gravelstones and siliceous tuffites
  • Structural control: the rocks lie on the southern limb of a large anticlinal fold of sub-latitudinal strike, complicated by a regional fault and splay faults; the quartz veins are confined to the splay faults, strike predominantly northwest, sometimes meridional. The site lies on the extension of the silicification zones and quartz veins with which tungsten mineralization is associated
  • Dimensions: the veins are usually no longer than 20–30 m, with a thickness of 10–15 cm, less often 25–30 cm. Copper vein: length 30 m, thickness 25–30 cm, dip 70° to the northeast; tungsten-bearing vein: length 20 m, thickness 10 cm
  • Copper grades: copper 0.4% — chemical analysis, one sample from a vein with malachite (a single sample, not an average). In the same sample, spectral analysis shows lead 0.015%, zinc 0.02% and molybdenum 0.0006% (order of magnitude)
  • Tungsten grades: tungsten 0.06% by spectral analysis of the second vein (number of samples not stated); molybdenum 0.0005%, tin 0.0008% (spectral analysis, order of magnitude)
  • Crushed-and-panned sample and gold: scheelite in the crushed-and-panned sample up to 1 g/t (weight contents of scheelite in the sample); gold was not detected in the samples analyzed for gold
  • Ore minerals: malachite (copper vein); in the crushed-and-panned sample from the tungsten-bearing vein, much pyrite, limonite after pyrite, scheelite, single traces of galena
  • Level of study: prospecting traverses; 6 geochemical samples from quartz veins and one crushed-and-panned sample were taken; workings are not mentioned in the description
  • Reserves and predicted resources are not given
Almaty Region · approximate place, inside the circle
QN-221

Copper

Almaty Region · A series of quartz veins with sparse nest-like disseminated chalcopyrite and smears of copper green

Single grab sample from quartz veins (not an average):

copper 0.41%

  • Host rocks: schists presumably of Proterozoic age; gneisses, mica schists and porphyrite dikes are also shown on the sketch map of the area
  • Structural control: the veins are vertical or dip steeply, at an angle of 85–87°; strike 35–40°
  • Dimensions: vein thickness from 1 to 3–4 m; traced along strike for 150–200 m
  • Grades: three chip samples and one grab sample were taken from the quartz veins. The grab sample (single) — copper 0.41%; a chip sample — copper 0.51%. No average grade for the veins is given
  • Ore minerals: chalcopyrite (nest-like dissemination), copper green (smears)
  • Level of study: a schematic geological map at a scale of 1:5000, one trench, four samples
  • Reserves and predicted resources are not given
Almaty Region · approximate place, inside the circle
QN-225

Tungsten, copper

Almaty Region · A copper-tungsten occurrence: scheelite mineralization in a felsite-porphyry dike and in separate silicification zones; fine dissemination of malachite, chrysocolla and pyrite is noted in the dike

Spectral analysis of channel (40) and geochemical (39) samples, ranges by samples (not an average):

tungsten 0.01–0.02% in three samples and 0.005% in one

  • Heavy-mineral sampling: a scheelite halo has been established (a heavy-mineral halo, not a grade in rock)
  • Host rocks: tuffaceous gravelstones, tuffaceous sandstones and siliceous tuffites of the Visean and Namurian stages of the Carboniferous, intruded by dikes of felsite porphyries and diorite porphyrites
  • Structural control: the area lies in the zone of influence of a large regional fault, therefore crush, brecciation and silicification zones are frequent; the silicification zones are oriented parallel to the fault, northwest strike 300–315°; of the secondary alterations, besides silicification, weak chloritization and epidotization are noted
  • Dimensions: silicification zones 0.5 to 2–3 m thick, traced along strike for up to 100–150 m; the intensity of silicification varies — from separate sparse veinlets to zones of fine-veinlet silicification where the rocks acquire a quartzite-like appearance
  • Tungsten grades: by spectral analysis of channel (40) and geochemical (39) samples, tungsten was detected in four samples — in three 0.01–0.02%, in one 0.005% (ranges by samples, not an average)
  • Copper grades: in the same samples (spectral analysis) copper is 0.004–0.008% in most samples and reaches 0.05% in one sample
  • Ore minerals: in the crushed-and-panned samples, grains of scheelite (from 15 to 50) and of copper minerals, much pyrite and limonite after pyrite; in one crushed-and-panned sample two grains of galena and arsenopyrite (a mineralogical estimate by grains, not a grade)
  • Level of study: prospecting traverses with collection of geochemical samples and crushed-and-panned samples, heavy-mineral sampling; 7 trenches with a total volume of 54 m³ were exposed; spectral analysis; no drilling in the materials
  • Reserves and predicted resources are not given
Almaty Region · approximate place, inside the circle
QN-228

Zinc, lead, copper, antimony

East Kazakhstan Region · Dikes of aplitic granite with pegmatite nests and lenses among quartz diorites, diorites and granodiorites; elevated contents of zinc, lead, copper and antimony were found in one sample from a pegmatoid inclusion

Single composite grab sample from a pegmatoid inclusion, spectral analysis (not an average):

zinc 0.6%, lead 0.3%, copper 0.1%, antimony 0.06%

  • Host rocks: quartz diorites, diorites and granodiorites (the granodiorites intrude the diorite massif). They are cut by numerous dikes and small oval bodies of pegmatoid granites and granite porphyries; dikes of light gray aplitic granites predominate, which in turn are cut by dikes of microdiorite porphyries
  • Structural control: the dikes strike predominantly close to latitudinal (azimuth 270–280°)
  • Dimensions: work area 1.0 km²; dikes 1 to 2 m thick; pegmatite nests and lenses 5 to 40 cm in size
  • Ore minerals: in the pegmatite nests and lenses, individual crystals and aggregates of black color resembling tourmaline and, occasionally, a sparse disseminated dark gray ore mineral
  • Grades, spectral analysis: one composite grab sample from a pegmatoid inclusion — zinc 0.6%, lead 0.3%, copper 0.1%, antimony 0.06% (single sample, not an average). In the other samples the contents of copper, zinc, lead and molybdenum are low (numbers not given)
  • Gold: present in 7 metallometric samples from loose deposits (secondary halo, not ore), five of them clustered; one value is named, 0.01 g/t (whether it is an average or a maximum for a sample is not stated)
  • Level of study: metallometric and gold geochemical survey (260 samples) and 12 composite grab samples from dikes with pegmatoid nests and lenses, spectral analysis; no workings or drilling are described
  • Reserves and predicted resources are not given
East Kazakhstan Region · approximate place, inside the circle
QN-230

Zinc, lead, copper

Karaganda Region · Hydrothermal lead-zinc-copper mineralization in a zone of strongly crushed and weathered pyroclastic rocks; the mineralization is expressed as bands

Spectral analysis of 270 bedrock samples (non-ferrous metals in few samples; values by samples, not an average):

lead up to 0.1%, copper 0.06%, zinc 0.03%

  • Host rocks: strongly crushed and weathered pyroclastic rocks — tuff-schists, tuffaceous sandstones, porphyrite tuffs and thin lenticular interbeds of agglomerate tuffs
  • Structural control: crushing and crumpling of the rocks are noted as a condition for the localization of mineralization
  • Dimensions: per the summary table, length of the mineralization bands up to 100–250 m with a width of 40–50 m; area of the prospecting work about 1.5 km²
  • Grades, spectral analysis of 270 bedrock samples: non-ferrous metals are present in few samples — lead up to 0.1%, copper 0.06%, zinc 0.03%, silver 0.003% (values by samples, not averages). By two chemical samples: lead 0.02–0.05%, zinc 0.01–0.03%, copper 0.01%
  • Grades per the summary table, chemical analysis (number of samples not stated): lead up to 0.6%, zinc up to 0.6%, copper up to 0.3% (maximum values, not averages)
  • Secondary halos by metallometric survey are wider than the contours in the bedrock; the metal contents in them are of the same order (a secondary halo is not ore)
  • Ore minerals: not named; by spectral analysis, tin, germanium, molybdenum, arsenic and bismuth are also present (in hundredths of a percent according to the text), as well as silver (up to 0.003%)
  • Level of study: metallometric survey (665 samples from loose deposits) and spectral sampling of bedrock (270 samples) over an area of about 1.5 km²; the site was previously opened by several trenches; two chemical samples; drilling is not described
  • Reserves and predicted resources are not given
Karaganda Region · approximate place, inside the circle
QN-231

Zinc, copper, lead

Karaganda Region · Polymetallic (zinc, copper, lead) occurrence in a zone of opalization of limestones; by the authors' classification, the contact-metasomatic type

Spectral analysis (order of magnitude; number of samples not stated; not an average for the body):

zinc 1%, copper 1%, lead 0.19–1%

  • Host rocks: opalized limestones of the Lower Tournaisian near the contact with granites of Upper Carboniferous age
  • Structural control: a tectonic zone of meridional direction near the contact with granites
  • Dimensions: opalization zone with an area of 300 × 200 m
  • Grades, spectral analysis (number of samples not stated): zinc and copper 1% each, lead 0.19–1%, molybdenum 0.001–0.01% (order of magnitude, not averages for the body); chemical analyses are not given
  • Metallometric sampling revealed a dispersion halo of lead and zinc (numbers not given; a secondary halo is not ore)
  • Ore minerals: not named; associated — zinc, copper, molybdenum (by spectral analysis)
  • Level of study: spectral analysis of samples and metallometric sampling of earlier years; workings and drilling are not described
  • Reserves and predicted resources are not given
Karaganda Region · approximate place, inside the circle
QN-202

Copper

Kostanay Region · Copper mineralization of a secondary sulfide enrichment zone (as defined by the authors) in a weathering crust along a zone of tectonic dislocation and thrust; the ore body is vein-like (possibly a lens), dipping at 60–75°

Average for the ore body (authors' calculation from seven drill holes):

copper 4.73% at an average thickness of 2.53 m

  • The ore body lies at the junction of a large regional fault (dip 60–70°, displacement 300–400 m) with a series of other faults; the whole crush and weathering zone (about 200 m) carries copper, lead and zinc mineralization, with the maximum at the contact with limestones. Tectonic contact of red-colored sandstones and siltstones of the Upper Devonian with dolomitized limestones of the Upper Devonian; no intrusive rocks were encountered at the site
  • Ore body dimensions: about 200 m along strike and about 150 m down dip (150 and 100 m in the conclusion of the same report); thickness from 1.0 to 4 m, 2.53 m on average. 25–30 m above the main body a parallel zone 2–4 m thick with copper 0.3–0.65% is identified
  • Average for the ore body (the authors' calculation from seven drill holes): copper 4.73% at an average thickness of 2.53 m; range of copper contents in the body from 1.0 to 12%. In the author's table the sum of the thicknesses of the seven intersections is printed as 17.8 m, whereas the addition gives 18.8 m; at 18.8 m the average would be 4.48%
  • Average per working (drill-hole intersections, thickness — copper): 4.0 m — 7.80%; 1.2 m — 2.80%; 4.0 m — 2.32%; 1.0 m — 1.75%; 3.0 m — about 5.7% (a calculated value, the row is not fully printed in the source copy); 2.60 m — 3.60%; 3.0 m — 4.03%
  • Lead in the body averages 0.2–0.3%, zinc 0.1–0.3%, in individual samples up to 1–2%; in the oxidation zone copper from 0.1 to 0.65%, average 0.2–0.3%. In individual samples of lead-zinc mineralization in limestones (not the copper body), by spectral analysis silver up to 0.003%, gold up to 0.03 g/t
  • An external control analysis of four samples of the ore interval gave copper contents higher than the original ones (10.44; 12.70; 10.96 and 1.74%); the control is noted as “below the permissible” because of the small number of samples
  • The ore is a dark gray or black argillite-like clay with a small admixture of quartz sand and concretions of iron sulfides; ore minerals: chalcocite (61% of the heavy-mineral concentrate), native copper (17% of the concentrate), sphalerite, galena, pyrite, barite, apatite; in the oxidation zone chrysocolla, malachite, smithsonite, limonite
  • The weathering crust has elevated phosphorus: P2O5 in individual intervals 6–8%, in individual samples 14–17%. A small technological sample (2 kg, copper 10% in the original ore): a concentrate with copper 40.5% was obtained, but the yield was 4.1% and the recovery 16.6% because of the fine grain size of the ore (this is a beneficiation result, not a grade in the ore)
  • An approximate estimate by the authors: about 9 thousand t of copper (ore body volume 75,900 m³, ore density 2.5 t/m³, ore 189,750 t, copper 4.73%); no category — this is a forecast, not reserves
  • Level of study: core drilling, the ore body was intersected by seven drill holes (spacing along the profile 50 and 25 m, profiles 200 m apart), samples of 1.0–2.0 m from half of the core, chemical and spectral analysis. Primary ores were not intersected: in the dislocation zone the weathering crust descends 250–300 m; nine planned drill holes of 350 m each were not drilled (24% of the planned scope was completed), geophysics was not used, the form of the body at depth is unclear
Kostanay Region · approximate place, inside the circle
QN-213

Gold, copper, silver

Karaganda Region · Gold-copper-silver mineralization with molybdenum and lead in silicification zones and zones of disseminated sulfide mineralization

Average for a drill-hole interval (the best described interval, 2.8 m; number of samples not stated):

gold 1.34 g/t, silver 10.0 g/t, copper 0.70%

  • Ore minerals: pyrite, chalcopyrite, galena, sphalerite, rutile, rarely hematite, chalcocite, goethite; by-products zinc up to 0.1% and tin up to 0.006% (earlier data, low contents)
  • Host rocks: intrusive rocks of intermediate composition; in the surroundings, volcanogenic and carbonate rocks and dikes of felsic composition; about 30% of the area is covered by Quaternary deposits. The mineralization is confined to silicification zones in the host intrusive rocks
  • Three silicification zones have been identified, 950 m long in total, with an average thickness of 9 m; the zones were assessed to a depth of 100 m. For the forecast calculation an ore-bearing zone area of 90,087 m² was adopted, with a total thickness of potential ore-bearing levels of 10.6 m
  • Average for drill-hole intervals (number of samples in the interval not stated): the best described interval is 2.8 m – gold 1.34 g/t, silver 10.0 g/t, copper 0.70%, lead 0.45%, molybdenum 0.006%; in other intervals (1 to 15 m) gold 0.015–0.47 g/t, in some intervals silver 1.65–12.82 g/t, copper 0.01–0.40%, lead 0.03–0.47%, molybdenum 0.0002–0.02%
  • Samples from silicification zones (range across samples): gold 0.029–0.635 g/t. Range of “elevated contents” in the authors' summary (the upper limits do not occur in the descriptions of individual intervals and are not tied to samples): gold 0.1–3.12 g/t, silver 1.0–20.72 g/t, copper 0.1–1.04%, molybdenum 0.0001–0.06%, lead 0.1–1.06%
  • Earlier data: gold in channel samples 0.02–0.04 g/t (maximum up to 1.5 g/t), in drill holes mostly not more than 0.015 g/t (maximum 1.5 g/t); in one drill hole, by fire assay, gold averages 13 g/t over a 5 m interval and one vein sample gave 15 g/t (single sample; in the summary table the maximum for channel samples is 1.5 g/t, the figures disagree). A control drill hole of the modern work, drilled to check this hole, showed no high grades (maximum 0.47 g/t)
  • Level of study: earlier work – induced polarization electrical survey, drill holes and trenches; modern work – core drilling, geophysics, core sampling, petrographic and mineralogical studies
  • Predicted resources of category P1 (forecast, not reserves): ore 5.195 million t, gold 1.662 t at an average of 0.32 g/t (cut-off grade 0.1 g/t, bulk density 2.87 t/m³); by-product silver per the authors' table 40.857 t (7.90 g/t)
Karaganda Region · approximate place, inside the circle
Contact