Skip to content
Geology

How to read a geological map: colours, faults and cross-sections

How to use a geological map legend, distinguish a rock contact from a fault, understand dip angle and read a cross-section. Includes a scale example and common mistakes.

Updated 20 October 2026 · 4 min read

Contents

A geological map shows how rocks and geological structures are distributed across an area. Reading it takes more than coloured areas: you also need the legend, scale, labels and the author's notes. The same approach applies to maps of Kazakhstan: first identify what a specific sheet shows, then consider what it may tell you about the area.

If you are still choosing a map, start with our guide to geological maps of Kazakhstan: a bedrock map, a map of known mineral occurrences and a map of subsoil rights answer different questions.

1. Start with the map frame and legend

Find the sheet name, scale, year, coordinate grid and symbols. Keep this information with the map itself: a cropped screenshot can lose important context.

The legend pairs each geological unit with a colour or pattern, a letter code and a description. These may indicate age, rock composition and other features. Read them together: a colour without its label is not enough. The Wisconsin Geological and Natural History Survey (WGNHS) recommends this kind of map reading.

Check which map layer you selected as well. For example, the BGS Geology Viewer distinguishes bedrock from superficial deposits, and its legend changes with the map content. This is a UK teaching example, not a source of data about Kazakhstan.

2. Convert the scale into a distance you can picture

At a scale of 1:200,000, one centimetre on the original map represents two kilometres on the ground. At 1:50,000, it represents 500 metres. Four kilometres therefore spans two centimetres and eight centimetres, respectively.

On screen, zooming changes the image size. Use the scale bar or the viewer's measuring tool. Enlarging a scan does not add new observations: a small fault or an individual rock exposure may not have been included in the source material.

3. Tell a rock boundary from a fault

A contact is a boundary between geological units. A fault is associated with displacement along a fracture. The two lines may look similar, so compare their symbols with the legend.

A solid, dashed or other line may show confidence, a position beneath overlying deposits or another condition. Do not assume every dashed line means the same thing. The USGS/FGDC standard for geologic map symbols describes several variants and their uses; it should not automatically be treated as the legend for a Kazakhstan map sheet.

4. Read the orientation symbol

Strike shows the direction of a layer; dip shows the direction and angle at which it slopes. A common symbol may have a short line and a number such as 35° beside it. That is the dip angle, not depth, metal content or layer thickness. Check the legend to identify exactly what was measured and how it is shown: different symbols may refer to layers, fractures or other structures.

5. Find the cross-section line

A cross-section shows an interpretation of the structure in a vertical plane along a selected line. First find that line on the map, then compare the units it crosses with the section. Check the horizontal and vertical scales: if they differ, slopes appear differently in the drawing.

A layer drawn as continuing underground does not mean its full shape has been established by drilling. Check which observations and materials the author used.

A first-pass example

Suppose the area you are reviewing crosses two coloured units and a dashed line. A useful sequence is to identify both units in the legend, interpret the line, check the original scale and find the matching cross-section. The result is a clear description of the geological setting and questions for further checking. The combination of a colour and a fault does not by itself prove a gold deposit.

For reviewing collected maps, samples and reports, see the geological materials checklist.

Frequently asked questions

Can you find gold from a map colour?

No. A colour identifies a geological unit according to the legend. Assessing mineralisation requires more information; the map alone does not confirm reserves.

Can I use a map without its legend?

For a meaningful review, find the complete sheet and its notes. Guessing what codes and lines mean can lead to the wrong conclusion.

What should I send a geologist?

Send the complete sheet with its legend, title and source, scale and year, the boundary of the area you are interested in, and a short question. For example: “I want to understand which rocks and structures are shown here and what data would be needed for further review.” You can discuss the task with the team on our geological services page.

Sources

More guides

Ready to discuss an area?

Browse the areas we have prepared or message us — we reply within one business day.

Illustration
Contact