Skip to content

QN-251 · Gold-silver-polymetallic mineralization in propylites and quartz-sericite metasomatites along a fault of submeridional strike; two types of orebodies have been distinguished — lenses of rich massive ore and bodies with nest-disseminated mineralization

Lead, zinc, gold — Almaty Region

Average for the orebody (trench sampling; length 110 m, average thickness 3.0 m):

lead 4.05%, zinc 2.55%, gold about 1 g/t

  • Zone of altered rocks: along the fault and its splay fractures, hydrothermal solutions formed a linear zone up to 70–100 m wide, traced for more than 1.5 km; the altered rocks carry polymetallic mineralization. Medium-temperature propylites (quartz, sericite, chlorite) formed almost regardless of the composition of the host rocks; mineralization is confined to their inner zones, and the highest concentration of ore minerals is in quartz-sericite metasomatites, especially brecciated and crushed ones
  • Minerals and components: ore minerals are galena, sphalerite, chalcopyrite, pyrite and occasionally gold; secondary minerals are cerussite and anglesite. Useful components are lead, zinc, copper and gold; by spectral analysis, also silver and cadmium
  • Orebody in the centre of the zone: outlined by trenches, length 110 m, thickness 2–4 m (average 3.0 m). Average of trench sampling: lead 4.05%, zinc 2.55%, gold about 1.0 g/t. The analytical method for lead and zinc is not named in the source, and the volume contains no sample tables
  • Other trenches: central trench, thickness 4 m, lead 4.5% and zinc 0.9% (weighted averages), gold up to 1.3 g/t (this is a maximum, not an average). Two adjacent trenches, zone 10–30 m, traced for more than 250 m: lead 0.2–28%, zinc 0.2–7% (range across samples). Rim of the body, thickness about 10 m: lead 0.1–0.5% (average about 0.35%), zinc 0.1–0.4% (average about 0.25%)
  • Single sample from the detailed site (fire assay): gold 0.2 g/t, silver 3.5 g/t; a single sample is not an average grade
  • Massive-ore lens in the central trench: controlled by the main fault, dipping west at 70°; massive ore is exposed at a depth of 1.0 m, lens thickness up to 0.5 m, about 100 m along strike
  • Zinc halo: a second zone of altered rocks has been outlined, about 1.7 km long and 300–500 m wide, with halos over an area of 260 × 500 m; along a profile over 68 m, zinc 0.1–0.6% (most samples 0.3–0.6%), together with lead, copper and silver (range across samples)
  • Degree of study: soil geochemistry, a detailed site, trenches every 50–100 m with channel sampling, induced-polarization electrical survey, about 500 geochemical samples; all work was done from the surface, and the reports reviewed show no drilling on the site. There are no gold assays for the alteration zones next to the body. The relief is mountainous. No reserves or predicted resources have been estimated

Report fragments

Source: archival geological reports (scans in our archive)

Location

The place is shown approximately: the object lies inside the circle. The exact place and materials follow a meeting.Region boundaries: © OpenStreetMap contributors, geoBoundaries (ODbL)
Contact