QN-247 · A series of quartz veins and small veinlets (high-temperature quartz, light grey and white) with disseminated fairly large wolframite crystals and molybdenite flakes; the selvages of the veinlets are greisenized. According to the authors, a high-temperature vein rare-metal type, genetically related to the hydrothermal activity of late Upper Paleozoic intrusions
Tungsten, molybdenum — Pavlodar Region
Range of group averages for veinlet groups (sampling table, 21 groups; no overall average):
WO₃ 0.01–1.03%
- Host rocks: medium-grained leucocratic granites of late Hercynian age; the granites are cut by dykes of fine-grained porphyritic alaskites, granite porphyries and lamprophyres. The mineralization is confined to granites of the late Upper Paleozoic complex
- Morphology: wolframite is distributed unevenly, often in pockets; in individual pockets the crystals reach 35 × 15 × 3 mm. The greisenized rim is, as a rule, no thinner than the veinlet itself; greisenization is most developed in the central part of the ore field and fades towards its periphery; a greisen pocket 10 × 8 m in size is described in the central part
- Structural control: the veinlets mostly strike east-west or nearly east-west (azimuth 90–97°), less often north-west (300–325°); according to another description, the main direction is close to east-west (azimuth 95°) and the diagonal one is at azimuth 120°, with veinlets of both directions formed at the same time. The veinlets are grouped into vein systems up to 400 m long; more than 40 separate veinlets are combined into about 20 groups, each confined to a single fracture (according to another description, more than 45 veinlets in 21 groups)
- Dimensions: the total length of explored and sampled veinlets is 2 800 m; vein systems are up to 400 m long. Individual veinlets are 2–5 cm thick, less often 7–10 cm, occasionally 17–20 cm (according to another description 3–5 cm, rarely 10 cm); average thickness in the sampling table 0.015–0.05 m (1.5–5 cm), 0.13 m in one row
- Sampling table by veinlet groups (21 rows; samples from the sampled intervals): group average WO₃ 0.01–1.03%, Mo 0.005–0.35% — this is the range of the group averages; there is no overall average for the ore field. The grade is given over a veinlet thickness of 0.015–0.05 m (0.13 m in one row). The minimum of 0.01% is a single sample over a 20 m interval; the maximum of 1.03% is a row with a thickness of 0.04 m (23 samples over a 230 m interval)
- Summary of occurrences (ranges, not an average): WO₃ “reaches 6%” (maximum, a single sample), “on average over intervals 0.1–0.6–1.0%” (three values, as in the source); Mo 0.05–0.2%. Selvages (greisenized rims) were sampled separately, by table rows: row average WO₃ 0.08–0.3%, Mo 0.012–0.021%
- Degree of study: the work is described in three geological sources; surface sampling in small clearings (296 clearings, chip samples taken); quartz veins and veinlets and the greisens in their selvages were sampled separately. Total length of sampled intervals 2 780 m (veins and veinlets 0.015–0.4 m thick): WO₃ 0.06–1.03%, Mo 0.005–0.35%; selvages (340 m): WO₃ 0.08–0.3%, Mo 0.012–0.021% — these are the limits of the values named in the text (individual samples or intervals)
- Heavy-mineral concentrates and spectral analysis: in heavy-mineral samples from the deluvial-proluvial deposits of the ore field, wolframite, scheelite and basobismutite at 10–30 grains per concentrate; where the quartz veinlets are directly located, wolframite 0.7–35 g/t (in one case 466 g/t), scheelite 0.7–22 g/t (in one case 47 g/t), basobismutite up to 3 g/t (mineral content in the sediments, not in ore). By spectral analysis, besides tungsten and molybdenum, bismuth, tin and lead were found at hundredths of a per cent
- Ore minerals: wolframite (visible to the naked eye), scheelite (identified under a binocular microscope), molybdenite (flakes), pyrite, sphalerite, basobismutite, bismuthinite; also muscovite and fluorite
- Geologists’ predicted reserves (the authors’ calculation, not reserves by category; no category is named): amount of metal per 1 m of depth for the whole deposit — 1.256 t WO₃ and 0.122 t Mo (total of the sampling table by veinlet groups: length of the sampled interval, average thickness, density of 2.5 g/cm³ and average grade). The calculation is made over the veinlet thickness, and for some rows the selvages are counted separately; another description gives the same total for WO₃. There is no reserve estimate by categories
Report fragments
Source: archival geological reports (scans in our archive)