Skip to content

QN-246 · Tungsten mineralization in greisen veins (quartz-mica and quartz greisens) with wolframite in granites; two ore bodies in a zone of closely spaced parallel veinlets and veins; in addition, the zone contains a number of thin greisen veins (from a few centimetres to 0.2 m and more), parallel to the second body and similar to it in structure

Tungsten, molybdenum — Karaganda Region

Average of five surface channel samples from one trench (first ore body):

WO₃ 0.34%, molybdenum 0.12%

  • Host rocks: granites; the area is well exposed, the relief is rocky and difficult to traverse
  • Structural control: the mineralization is confined to a zone of closely spaced parallel veinlets and veins of quartz-mica and quartz greisens striking north-west (azimuth 320–340°); the tungsten-bearing veins are concentrated in the central part of the zone
  • Dimensions of the zone: 2.5 km long, most distinctly in a strip 0.8–1.0 km long; the zone is up to 20–30 m wide; the tungsten-bearing veins are concentrated in a strip of about 400 m; the thickness of the ore bodies as a whole ranges from 5–10 cm to 1.5 m. The erosion level is shallow (as described by the authors)
  • Dimensions of the bodies: first body — up to 200 m long with an average thickness of 1.2 m (quartz greisen 0.1–0.2 m thick, rarely up to 0.5 m); second body — average thickness 0.8 m, up to 2 m, length with interruptions several hundred metres. The bodies were traced from the surface
  • First ore body (a vein up to 200 m long): average of five surface channel samples from one trench — WO₃ 0.34%, molybdenum 0.12%, lead 0.1%. One sample of this body has WO₃ 0.55% (a single sample, not an average)
  • Second ore body: average of surface channel samples from three trenches (11–12 samples) — WO₃ 0.2%, molybdenum 0.054%, bismuth 0.004%, tin 0.017%. Summary in the primary source: “average grades of the two bodies are 0.34% and 0.2% tungsten trioxide”
  • Other veins of the zone: in single samples WO₃ 0.1–0.2%, grades are usually lower (single-sample values, not an average)
  • Minerals: wolframite is the tungsten mineral; molybdenum, lead, bismuth and tin occur as associated components (figures are given in the grades above, all are averages of surface channel samples); in the description tungsten consistently prevails
  • Degree of study: traverses during which the occurrence was found, and 10 trench-clearings with a total volume of 80 m³ (on the occurrence and on the continuation of its structure); channel sampling, from the surface. The drilling planned in the project was not carried out
  • Geologists’ predicted reserves (the authors’ forecast, not reserves by category; no category is named): down to a depth of 100 m in the two ore bodies, roughly 300–500 t, an estimate based on surface average grades of 0.34% and 0.2% tungsten trioxide. There is no reserve estimate by categories

Report fragments

Source: archival geological reports (scans in our archive)

Location

The place is shown approximately: the object lies inside the circle. The exact place and materials follow a meeting.Region boundaries: © OpenStreetMap contributors, geoBoundaries (ODbL)
Contact