QN-245 · Lead-zinc mineralization in quartz-barite metasomatites (mineralized microquartzites) and in zones of stringer silicification along faults; galena and sphalerite form fine, uneven dissemination, and in individual bands fine-grained galena forms massive aggregates; two ore bodies have been outlined, the Central and the Southern
Lead, zinc — Almaty Region
Average over a thickness of 5 m in the first section of the Central body (channel samples; samples from 11 to 44%):
lead 19.7%, zinc 1.35%
- Host rocks: volcanic-sedimentary rocks of the Visean stage of the Lower Carboniferous — trachyte porphyries, tuffs of dacite and trachydacite porphyries, tuffaceous sandstones, sandstones and limestones; they are cut by small intrusions and dikes of syenite-diorites and granite porphyries; at the contact with the quartz-barite bodies the rocks are silicified, carbonatized and sometimes baritized
- Structural control: small faults and fractures with veinlets of quartz, barite, calcite and sometimes fluorite; the veinlets, 0.5–10 mm thick, form linear zones striking at azimuth 40–80°, and the central parts of the zones are made up of quartz-barite bodies; the area has many sublatitudinal faults with breccia zones
- Dimensions: the Central body is 500 m long along strike and 6 m thick (on one side it is covered by thick scree); in the first section, according to the author's handwritten note in the margin, there is a lens of massive galena measuring 5 × 12 m. The Southern body is a zone of stringer silicification with two vein-like quartz bodies 2 and 1.5 m thick
- Central body, first section (channel samples; the analytical method is not named in the source): lead 19.7%, average over a thickness of 5 m, samples from 11 to 44%; zinc 1.35%, average. A later summary gives 16.7% lead for this section; the discrepancy has not been resolved. On the flanks of the body lead is no more than 0.1%
- Central body, second section: thickness 3 m, lead 0.71% (samples 0.2–1.56%), zinc 0.88% (samples 0.1–2.85%). Third section: thickness 4 m, elevated lead only over 2 m, 0.9% (samples 0.29–1.52%)
- Southern body (channel samples): quartz body 2 m, lead 1.68%; quartz body 1.5 m, lead 1.4%, zinc 0.27%; silicification zone 10 m, lead 1.75% (samples 0.6–4.85%), zinc 0.66%; silicification zone on the flank, 6 m interval, lead 0.59% (samples 0.4–0.85%)
- Spectral samples from veinlets taken on traverses (single samples, not ore intervals): lead and zinc as a rule above 0.1%; molybdenum usually thousandths of a percent, rarely 0.01 and 0.10%; silver up to 0.01%
- Minerals: galena, sphalerite; gangue minerals are quartz, barite, calcite and fluorite. In heavy-mineral concentrates: barite and celestine in every concentrate (up to 5 g/m³), galena, cerussite, anglesite, very rarely wulfenite and vanadinite; scheelite forms three small dispersion trains (up to 1–1.5 g/m³ in a concentrate); cinnabar, chalcopyrite, molybdenite and gold as single grains (these are concentrates, not grades in ore)
- Degree of study: assessment of a lithogeochemical halo, prospecting traverses (only in part of the area), linear, channel and heavy-mineral sampling; there is no drilling and there are no mine workings. The relief is high-mountain, with elevations from two to three thousand metres above sea level; access only by pack transport
- No reserves or predicted resources have been estimated
Report fragments
Source: archival geological reports (scans in our archive)